TOP 20 best miter saws: 2024-2025 ranking in terms of price / quality and which combined model to choose for your home

During the repair or construction of a house, it often becomes necessary to cut both wooden blanks and thin metal and plastic at a certain angle.

In this case, you can not do without a miter saw.

But for it to give the desired results, the tool must be of high quality, safe, simple and easy to use.

It was with these parameters in mind that our rating was compiled, which included the best models of such a device in terms of price / quality ratio, according to users and experts.

Rating of the TOP 20 best miter saws 2024-2025

Place	Name	Price
TOP 4 best miter saws for the home by price / quality for 2024-2025
1	Metabo KGS 216 M	Ask for a price
2	Metabo KGS 254 M	Ask for a price
3	Makita LS1040	Ask for a price
4	Makita LH1040F	Ask for a price
TOP 4 best miter saws with broach
1	BOSCH GCM 800 SJ	Ask for a price
2	Metabo KGS 305 M	Ask for a price
3	BOSCH GCM 8 SJL	Ask for a price
4	Makita LS0714	Ask for a price
TOP 4 best inexpensive miter saws
1	Metabo KS 216 M Lasercut	Ask for a price
2	ZUBR ZPT-255-1800 PL	Ask for a price
3	ZUBR ZPT-210-1600 PL	Ask for a price
4	Wortex MS 2116 LM	Ask for a price
TOP 4 best professional miter saws
1	Makita LH1040	Ask for a price
2	Makita LH1201FL	Ask for a price
3	BOSCH GCM 8 SDE	Ask for a price
4	Metabo KGS 315 Plus	Ask for a price
TOP 4 best cordless miter saws
1	RYOBI EMS190DCL	Ask for a price
2	Metabo KGS 18 LTX 216 0	Ask for a price
3	Einhell TE-MS 18/210 Li-0	Ask for a price
4	Makita DLS600Z	Ask for a price

How to choose a miter saw for your home?

When choosing a miter saw, consider ease of use, power, and safety.

It is worth paying attention to the following parameters:

1. Power. From 1000 to 1300 W - saws for beginners and amateurs, able to cope with simple household tasks. 1600-2500 W - professional tools.
2. Disc rotation speed. The lower it is, the more accurate the cut and less dust during operation. Good performance 3000-4500 rpm.
3. Types of materials. Not every model will cope with metal, even if it is thin aluminum. Be sure to check this point before buying.
4. Feeding method. If you often have to work in open areas, then you should take a closer look at battery models.
5. Engine protection. It is important to start the engine smoothly, without jerks, and its braking under heavy loads.
6. Additional functions. This includes a laser marker, backlight, connecting a vacuum cleaner. Thanks to this, saw control and work with materials is as comfortable as possible.

TOP 4 best miter saws for the home by price / quality for 2024-2025

Metabo KGS 216 M

A popular model from a Japanese manufacturer that stands out from its competitors well thought-out design for maximum comfort of using the tool.

High-quality materials, a reliable aluminum alloy case and an optimal power of 1500 W with a stable motor speak of a long service life of the device.

A molded sole and additional clips provide a secure fit, and for precise and even cuts, you can use a laser marker and bright LED lights..

It is very easy to operate the saw, it is equipped with an ergonomic handle with rubber pads, thanks to which the tool does not slip in the palm of your hand.

Due to the large number of settings and functions, the model is also suitable for professional use, easily coping with wood, plastic, tiles and aluminum profiles / sheets.

Main characteristics:

1. Saw power - 1.5 kW.
2. Disc rotation speed - 5000 rpm.
3. Disc diameter - 216 mm.
4. Does it work with metal?
5. Weight - 13.5 kg.

Metabo KGS 254 M

This model from a well-known manufacturer belongs to the semi-professional models and equipped with a 1.8 kW motor.

Often used in workshops, bought for site visits. The disk rotates at a speed of 4.5 thousand revolutions per minute, it does not make much noise or dust. There is a special dust collector that is connected to an industrial vacuum cleaner.

For comfortable work, the manufacturer took care of the laser marker and LED backlight.

The tool is complemented by a wide range of equipment, the body is equipped with additional supports so that it is possible to work with long and wide workpieces.

The power of the tool is sufficient not only for plastic and hard wood, but also for non-ferrous metals. Die-cast aluminum body and sole for long life.

Main characteristics:

1. Saw power - 1.8 kW.
2. Disc rotation speed - 4500 rpm.
3. Disc diameter - 254 mm.
4. Does it work with metal?
5. Weight - 16.3 kg.

Makita LS1040

This model will cope with sawing wood, plastic and thin aluminum profiles, will be a good helper for beginner carpenters who prefer to manufacture and repair pieces of furniture.

Often used when installing doors or perfectly precise cutting of skirting boards. The saw is rotated 52 degrees and tilted up to 45 degrees.

Powered by a network, the power of the tool is 1650 watts.

If the saw blade gets stuck in the work material, the motor slows down and stops on its own..

The case does not heat up under a stable load, the motor is stable and runs without interruption.

For comfortable sawing of long workpieces, there are additional supports, and the sole is made of cast aluminum, has a convenient line and will last a long time..

The disk is subject to replacement, rotates at a speed of 4600 revolutions per minute.

Main characteristics:

1. Saw power - 1.65 kW.
2. Disc rotation speed -4600 rpm.
3. Disc diameter - 260 mm.
4. Does it work with metal?
5. Weight - 11 kg.

Makita LH1040F

An excellent sawing device that does not need calibration and is able to provide high productivity and excellent cut quality right out of the box.

Solid build, powerful 1650W motor and double safety insulation make this miter saw one of the most popular models in 2024-2025.

The model is suitable for use in a small workshop, and for repair work in houses and apartments..

Easily cope with hardwood, aluminum, plastic, laminate.

The motor spins the disc 260 mm at 4800 rpm. It starts smoothly, gradually increasing power.

The work surface is illuminated by a fluorescent lamp, which is inferior in brightness to the LED backlight, but it is quite enough for viewing.

It is possible to connect an industrial vacuum cleaner, all garbage is collected in a special dust collector.

Main characteristics:

1. Saw power - 1.65 kW.
2. Disc rotation speed - 4800 rpm.
3. Disc diameter - 260 mm.
4. Does it work with metal?
5. Weight - 13.7.

TOP 4 best miter saws with broach

BOSCH GCM 800 SJ

The German brand is not in vain popular among buyers. This model is well built fully repairable, designed for standard 216 mm saw blades.

The 1.4 kW motor is enough for repair work and tool use in small workshops.

Quite compact size and light weight allows you to freely move the saw, transport it in the trunk. The device is connected to the network, the length of the cord is 2 meters.

The engine starts smoothly, there is a lock against accidental activation. If the saw blade gets stuck in the workpiece, the motor stops, reducing the load and protecting the tool from breakage.

Operation is simple, large handle with rubber pads provides a secure grip.

The case is assembled from high-quality plastic, disk replacement is simple, a special key is included.

Main characteristics:

1. Saw power - 1.4 kW.
2. Disc rotation speed - 5500 rpm.
3. Disc diameter - 216 mm.
4. Does it work with metal?
5. Weight - 13.5 kg.

Metabo KGS 305 M

Professional model miter saw with a powerful 2 kW motor and rotation disc up to 3700 rpm.

It is useful for working with hardwoods, and with plastic, and with non-ferrous metals.

Due to the large size and heavy weight, it is used only on the table, the body is equipped with additional supports, which are indispensable helpers when working with wide and long workpieces..

It is worth noting a good factory calibration, the tool can be used immediately from the factory box. The saw is functional, the manufacturer has taken care to make it as convenient as possible.

There is a bright backlight, a laser market, can be connected to a vacuum cleaner. The ergonomic handle fits comfortably and securely in the palm of your hand, there is a spindle lock and smooth engine braking.

Ventilation holes quickly cool the internal mechanism and prevent overheating during prolonged use.

Main characteristics:

1. Saw power - 2 kW.
2. Disc rotation speed - 3700 rpm.
3. Disc diameter - 305 mm.
4. Does it work with metal?
5. Weight - 19.6 kg.

BOSCH GCM 8 SJL

A worthy representative of German production, which has a recognizable quality assembly and reliable arrangement of internal mechanisms.

A 1600 W motor spins the disc at a speed of 5.5 thousand revolutions per minute, the case has a well-thought-out system of ventilation holes, so it does not overheat during prolonged use.

The saw works both with plastic and wood (including hardwoods), as well as with non-ferrous metals.

The saw is fully repairable, all the necessary spare parts can be found on the manufacturer's website. The accuracy of cutting and cutting is ensured by the installed laser marker, and dust and sawdust are removed using a vacuum cleaner connected via an adapter.

Such a saw is often used for repairs or in small workshops.. The tool does not need calibration and is ready to work right out of the factory box.

Main characteristics:

1. Saw power - 1.6 kW.
2. Disc rotation speed - 5500 rpm.
3. Disc diameter - 216 mm.
4. Does it work with metal?
5. Weight - 17.3 kg.

Makita LS0714

Quality miter saw for use in construction or renovation works.

It has a small power of 1010 W, is equipped with a disk with a diameter of 19 cm, which rotates 6 thousand times per minute. It is used to work with blanks made of wood and plastic, it cuts skirting boards and laminate well.

Quite compact in size and weighs 12.7 kg, fits in any trunk. Powered by the mains, a two-meter cord does not interfere when installing the tool on the table. It has a wide sole and reliable support for fixation.

Users praise this model for its quality build and good factory calibration.. An industrial vacuum cleaner can be connected to the saw, it is equipped with a dust collector.

There is also a spindle lock..

If necessary, the motor brakes and slows down the saw blade to a complete stop to protect the tool from breakage.

Main characteristics:

1. Saw power - 1010 watts.
2. Disc rotation speed - 6000 rpm.
3. Disc diameter - 190 mm.
4. Does it work with metal?
5. Weight -12.7 kg.

TOP 4 best inexpensive miter saws

Metabo KS 216 M Lasercut

One of the smallest and lightest models in our ranking. Attaches securely to any surfaces due to the wide molded sole.

There is a spindle lock, if necessary, the saw blade can be replaced in a few seconds.

The diameter of the disk used is 216 mm, it rotates at a speed of up to 5000 rpm. Since this is a desktop instrument, a two-meter network cable is enough for comfortable work.

All controls are located directly in front of the operator and control the device is as simple as possible.

The manufacturer equipped the saw with a laser mark for cutting accuracy and a backlight so that you can work even in dim lighting..

A vacuum cleaner connection is available to remove dust and sawdust from the work surface.

Main characteristics:

1. Saw power - 1.35 kW.
2. Disc rotation speed - 5000 rpm.
3. Disc diameter - 216 mm.
4. Does it work with metal?
5. Weight - 9.4 kg.

ZUBR ZPT-255-1800 PL

Inexpensive semi-professional model that is suitable for working not only with wood and plastic, but also with thin aluminum.

Makes cuts of different types: straight, oblique, combined and oblique.

Due to its functionality and power of 1.8 kW, such a saw is often bought for a home, a small workshop or field trips.

The dimensions and weight of the saw allow it to be carried or transported in the trunk. Flexible settings and ease of use make this model popular among both beginners and professionals.

With the help of a laser marker and bright illumination, the cut accuracy is ensured.

The disc rotates at 5000 rpm and can be tilted 45 degrees and rotated 47 degrees.

It is possible to connect a vacuum cleaner to clean the work surface from sawdust and crumbs formed from materials.

Main characteristics:

1. Saw power - 1.8 kW.
2. Disc rotation speed - 5000 rpm.
3. Disc diameter - 255 mm.
4. Does it work with metal?
5. Weight - 13 kg.

ZUBR ZPT-210-1600 PL

Compact and lightweight miter saw that can be attached to your work table. It is connected to a 220 W network, a two-meter long cord is quite convenient to work without constraint in movements.

Such a device is suitable for working with blanks made of wood, plastic, non-ferrous metals, it is often bought by craftsmen who install interior and entrance doors.

A disk with a diameter of 21 cm rotates at a speed of 5 thousand revolutions per minute, the motor power is 1.6 kW.

If the load on the motor becomes too high or the saw blade hits material of inappropriate hardness, the motor brake is activated, saving the tool from breakage.

There is a laser marker for precise marking and a dust collector, the saw is connected to an industrial vacuum cleaner so that the working surface is clean and nothing prevents the operator from operating the machine.

Main characteristics:

1. Saw power - 1.6 kW.
2. Disc rotation speed - 5000 rpm.
3. Disc diameter - 210 mm.
4. Does it work with metal?
5. Weight - 10 kg.

Wortex MS 2116 LM

Another representative of compact miter saws, which has a good power of 1.6 kW.

The motor rotates the saw blade at a speed of 5 thousand revolutions per minute, does not overheat and is stable throughout the entire operation, even if you have to work out a large amount of material.

Such a saw can easily cope with hardwoods, various types of plastic, non-ferrous metals and laminate.

The accuracy of the cut is ensured by a laser marker, a vacuum cleaner can be connected to the saw, for this there is a special adapter and a capacious dust collector in the kit.

Due to its low weight, the device can be easily placed in the trunk if you need to take it to the construction site..

The angle of inclination and the angle of rotation are 45 degrees each, the tool is controlled using a large ergonomically shaped handle.

Main characteristics:

1. Saw power - 1.6 kW.
2. Disc rotation speed - 5000 rpm.
3. Disc diameter - 210 mm.
4. Does it work with metal?
5. Weight - 11.5 kg.

TOP 4 best professional miter saws

Makita LH1040

For professional work with various materials in a large volume, this model Japanese made is better than most.

With a good set, reliable assembly of the body and a long service life, the saw will become a good helper in the workshop or construction.

The engine power is almost 1.7 kW, and the disk rotates at a speed of 4.8 thousand revolutions per minute. Throughout the case, the manufacturer has placed ventilation holes that prevent overheating.

The engine starts smoothly, gradually increasing power. There is a function of smooth braking of the motor, if the device is faced with a large load, which can lead to breakage.

There is a bright backlight, it is possible to connect a vacuum cleaner. Replacing the disk is very simple and does not take much time, there is a special key included.

Users praise the model for a good factory calibration, thanks to which you can start working immediately after purchase.

Main characteristics:

1. Saw power - 1.65 kW.
2. Disc rotation speed - 4800 rpm.
3. Disc diameter - 260 mm.
4. Does it work with metal?
5. Weight - 13.7 kg.

Makita LH1201FL

A miter saw for professional use that easily handles non-ferrous metals, wood, plastic and tiles.

Due to the installed laser marker and the disc rotation speed of 3800 revolutions per minute, it is possible to achieve a smooth and accurate cut.

Powered by mains, power cord 2 meters long, motor power is 1.65 kW.

The saw is made of high quality materials and small in size, so it fits easily into almost any trunk. But its weight is significant, which is why it is most often used with a desktop mount.

There is a LED backlight with good brightness indicators, the engine starts smoothly and runs stably, without jerking.

There is also an engine braking function, you can connect an industrial vacuum cleaner to remove sawdust.

Main characteristics:

1. Saw power - 1650 watts.
2. Disc rotation speed - 3800 rpm.
3. Disc diameter - 305 mm.
4. Does it work with metal?
5. Weight - 20.7 kg.

BOSCH GCM 8 SDE

A small miter saw that is often used by both professionals and lovers.

An engine with a power of 1600 W is installed inside, the speed of rotation of the disk at 216 mm is 5 thousand revolutions per minute.

Of the main features of the model - smooth engine start and smooth speed control, which allows you to adjust the device for each type of working material..

The saw has a good factory calibration and is easy to maintain and operate. If necessary, spare parts for repairs can be found on the manufacturer's website.

Comfortable rubber handle provides a secure grip, there are also additional supports, thanks to which the saw is fixed to the table.

The tilt angle is 60 degrees, and the device turns 47 degrees.

Main characteristics:

1. Saw power - 1.6 kW.
2. Disc rotation speed - 5000 rpm.
3. Disc diameter - 216 mm.
4. Does it work with metal?
5. Weight - 18.5 kg.

Metabo KGS 315 Plus

Reliable and powerful professional miter saw that has a motor with a power of 2.2 kW, spinning the disk up to 4100 revolutions per minute.

This is less than the models we are used to, which leads to a lower noise level during work.

There is also a smooth speed control to ensure maximum efficiency when working with various materials: wood, thick plastic and metal..

The body and sole are made of cast aluminum, there are additional supports for secure fixing of the instrument to the table.

The saw is equipped with a laser marker, bright LED light and a large dust container.

This set of functions allows you to make the most accurate cut or cut, without being distracted by marking or cleaning the work surface..

And if the saw blade gets stuck in the workpiece, the motor will stop, protecting the tool from excessive load and possible breakage.

Main characteristics:

1. Saw power - 2.2 kW.
2. Disc rotation speed - 4100 rpm.
3. Disc diameter - 315 mm.
4. Does it work with metal?
5. Weight - 26 kg.

TOP 4 best cordless miter saws

RYOBI EMS190DCL

Lightweight and compact miter saw from a trusted manufacturer that runs on 18 V battery.

Such a model is often used as an assistant for a more powerful device or on the road, where there is no way to connect to the network.

Of course, for long-term operation of one battery is not enough and you will need to buy a couple of spare ones.. As well as the main one, since it is not included in the package.

The disk diameter is small, only 19 cm, it rotates at a speed of 4.5 thousand revolutions per minute.

You can connect a vacuum cleaner to the saw, it is equipped with a capacious dust collector, there is also a laser marker, thanks to which you can easily achieve an accurate and smooth cut at the right angle.

The device has a comfortable handle, which is securely fixed in the palm of your hand and makes it easier to control the tool.

Main characteristics:

1. Battery voltage - 18 V.
2. Disc rotation speed - 4500 rpm.
3. Disc diameter - 190 mm.
4. Does it work with metal?
5. Weight - 7430 grams.

Metabo KGS 18 LTX 216 0

Good battery powered miter saw with excellent performance and good functionality.

The battery voltage is 18V, enough to spin a 216mm disc at up to 4200rpm.

The model is equipped with a laser marker and bright illumination, thanks to which it is convenient and easy to work with the device.

Comes with a large dust container, so you can connect a vacuum cleaner to remove sawdust. By the way, the battery and charger are not included.

The manufacturer took care of a good cooling system so that the case does not heat up during long work.

There is also engine braking if the load is too large and can lead to breakdown.

Compact size and light weight allows you to take the saw with you, especially if you can not connect to the network.

Main characteristics:

1. Battery voltage - 18 V.
2. Disc rotation speed - 4200 rpm.
3. Disc diameter - 216 mm.
4. Does it work with metal?
5. Weight - 13.6 kg.

Einhell TE-MS 18/210 Li-0

Cordless miter saw with 210 mm blade, battery operated voltage 18 V.

The charger and battery are not included, but the disc and dust bag are included.

A vacuum cleaner is connected to the saw, the disk rotates at a speed of 3 thousand revolutions per minute, due to which the cut is as accurate and even as possible..

The engine has a soft start, the engine runs smoothly and stably, without jerking. Additionally, a backlight and a laser marker are installed, which can be easily distinguished even in bright light.

Such a device can easily cope with hard plastic, various types of wood, laminate, skirting boards, etc..

Due to its compact dimensions and low weight, the saw fits into any trunk and can be easily moved from place to place. The tilt angle is 45 degrees and the roll angle is 47.

Main characteristics:

1. Battery voltage - 18 V.
2. Disc rotation speed - 3000 rpm.
3. Disc diameter - 210 mm.
4. Does it work with metal?
5. Weight - 9.8 kg.

Makita DLS600Z

Lightweight (only 6.6 kg) and compact miter saw, ideal for travel and as a help to a more powerful device.

Powered by a battery with a voltage of 18 V (not included), a disk with a diameter of 165 mm rotates at a speed of 5 thousand revolutions per minute.

The model is equipped with a capacious dust collector, it is possible to connect a vacuum cleaner.

To make cuts and cuts perfectly even, the manufacturer took care of installing a bright LED backlight and a laser marker that does not fade under strong lamps..

The engine starts smoothly, gradually picking up the desired speed, there are ventilation holes along the body to cool all elements that heat up during operation.

If the saw encounters an excessive load, the motor stops to avoid damage..

With the help of a special key from the package, the disk is very easy to replace.

Main characteristics:

1. Battery voltage - 18 V.
2. Disc rotation speed - 5000 rpm.
3. Disc diameter - 165 mm.
4. Does it work with metal?
5. Weight - 6.6 kg.

Which firm to choose?

Our rating includes models of miter saws from the most popular manufacturers, such as:

• BISON - budget tools that can be used by both beginners and professionals are equipped with powerful engines that are not afraid of heavy loads;
• Metabo is a brand that manufactures professional tools. High-quality assembly, powerful engine, sharp and strong discs are a distinctive feature of the models.
• Makita - medium power miter saws with high-quality discs and comfortable tables;
• Bosch is a manufacturer from Germany, which has been a leader for several years, producing premium quality tools with high safety indicators for the operator.

What is the difference between an amateur miter saw and a professional one?

Miter saws are professional and amateur.

The latter are not designed for heavy loads, are cheaper in price and are equipped with a motor whose power rarely exceeds 1300 watts.

But professional tools have a power of 1.6 kW, wide saw blades and a well-thought-out design that is not afraid of heavy loads and can work for a long time without interruption.

Customer Reviews

Useful video

From the video you will get an overview of the best miter saw: