TOP 16 best well pumps: 2024-2025 rating for price / quality and which submersible to choose

In many private houses, remote from the central water supply system, water is supplied from wells on the site.

In order to always have clean and fresh water with sufficient pressure in the house, many people use submersible borehole pumps. But how to choose such a device?

Are there recommendations for choosing which models should be considered at the very beginning of the search?

To answer these questions, we have compiled our own rating of well pumps from well-known and trusted manufacturers.

When selecting models in the price / quality ratio, technical characteristics, customer reviews and expert opinions were taken into account.

Rating of the TOP-16 best pumps for a well in 2024-2025

Place	Name	Price
TOP 4 best borehole pumps by price, quality and reliability for 2024-2025
1	Aquarius BTsPE 0.5-50U	Ask for a price
2	Aquarius BTsPE 0.5-32U (820 W)	Ask for a price
3	Aquario ASP 1E-100-75 (1250 W)	Ask for a price
4	Grundfos MQ 3-35 (850 W)	Ask for a price
TOP 3 best low-cost borehole pumps
1	Aquarius BTsPE 0.32-40U	Ask for a price
2	UNIPUMP ECO 0 (370W)	Ask for a price
3	Aquarius BTsPE 0.5-16U	Ask for a price
TOP 3 best pumps for a well 40 m deep
1	Aquario ASP 1E-55-75 (700 W)	Ask for a price
2	Aquario ASP 1.5C-60-75 (920 W)	Ask for a price
3	VORTEX CH-60 (800 W)	Ask for a price
TOP 3 best pumps for a well with a depth of 25-30 m
1	JILEX Water jet PROF 55/50 (600 W)	Ask for a price
2	JILEX Water jet PROF 110/110 (1800 W)	Ask for a price
3	JILEX Water jet PROF 55/75 (900 W)	Ask for a price
TOP 3 best pumps for a well with a depth of 15-20 m
1	BELAMOS 3SP 60/1.8 (600 W)	Ask for a price
2	UNIPUMP ECO 2 (750 W)	Ask for a price
3	DELTA NP2-55/60 (900 W)	Ask for a price

How to choose a well pump?

When buying a pump for a well, first of all, attention is paid to the following parameters:

1. Water purity. There are models that are installed only in clean sources, there are pumps equipped with additional filters for silty wells or sandy wells.
2. Performance. It is reflected in the number of cubic meters of water pumped per hour. They should be enough for all household needs. It also allows you to find out how many points can be connected to one well.
3. Depth. Here, start from the depth of your well.
4. Head (maximum). An indicator of the height at which water will rise from the source. Be sure to consider the distance of the well from the place of water supply.
5. Protection. This includes protection against overheating and overload, provided by a thermostat. If necessary, the dry-running protection can be set independently using a float switch.

TOP 4 best borehole pumps by price, quality and reliability for 2024-2025

Aquarius BTsPE 0.5-50U

One of the most reliable downhole models for placement in wells up to thirty meters.

The manufacturer claims that the service life is 6 years, but users indicate that the pump can work for 10 years. And it is also a universal device that can be used to organize an automatic water supply system, installation in drinking wells and springs, as well as household tanks.

The pump delivers up to 30 liters per minute or 3.6 cubic meters per hour. At the same time, 1.1 kW of energy is consumed, and the operation of the device is almost silent.

The winding has a built-in thermal relay that protects the motor from overheating.

If the relay is triggered, the system automatically stops and is activated only after the temperature drops.

There is no dry run protection in the kit, but the device can be installed separately so that there is no need to monitor the water level in the well. The pump is equipped with a rope and cable, each 50 meters long.

Main characteristics:

1. Head (max), m - 75.
2. Throughput, cu. m / hour - 3.6.
3. Power, W - 1140.
4. Water temperature, ° C - 35.
5. Weight, kg - 16.3.

Aquarius BTsPE 0.5-32U (820 W)

Thanks to the production of the body and internal structure of this model from environmentally clean materials, the pump can be used in clean drinking water sources.

The device is equipped with a fine filter, so it cannot be placed in muddy and sandy wells.

The pump dives to a depth of 10 meters, pumping about 3.6 cubic meters per hour thanks to an 820 W motor.

In this case, the maximum pressure is 47 meters. Such a pressure allows you to provide the house with water not only for drinking needs, but also for supplying household appliances, various household needs and watering the garden / garden.

The main body is made of stainless steel, and some engine elements are made of brass and durable food-grade plastic, so the pump will last a long time and will not cause trouble with frequent breakdowns..

By the way, the device is completely repairable. The thermal relay protects the engine from overheating, the remote control is included in the package.

Main characteristics:

1. Head (max), m - 47.
2. Throughput, cu. m / hour - 3.6.
3. Power, W - 820.
4. Water temperature, ° C - 35.
5. Weight, kg - 11.7.

Aquario ASP 1E-100-75 (1250 W)

Well pump designed to dive to a depth of 50 meters with with a maximum head of up to 100 meters and pumping 3 cubic meters per hour.

By the way, the pump can carry out up to 30 starts per hour. The pump is only suitable for use with clean water, does not tolerate high levels of sand particles and can become clogged, which will then lead to failure.

The oil used in the engine belongs to the class of white medical oils, is completely safe for the body and is suitable for drinking water..

There is protection against overheating, the engine is cooled by a jet of water that passes through it during operation.

There is a built-in capacitor and a thermostat that turns off the device in case of overheating.

The package includes a long, 60 meters, network cable to connect to a power source without using an extension cord.

Main characteristics:

1. Immersion depth - 50.
2. Head (max), m - 100.
3. Throughput, cu. m / hour - 3.
4. Power, W - 1250.
5. Water temperature, ° C - 35.

Grundfos MQ 3-35 (850 W)

This model belongs to the surface models of pumping stations. Engine power in 850 W per hour pumps up to 3 cubic meters of water with a maximum head of 35 meters.

Of the additional functions, it is possible to note the increase in pressure if necessary.

The pump is immersed to a depth of 8 meters, connected to a 220/230 V network, does not need a stabilizer if the voltage drop is rare and is assessed as insignificant.

The operation is quiet, the noise level during start-up does not exceed 55 dB. There is an electronic control of the water level in the well, protection against dry running and overheating.

The engine is cooled by a jet of water that passes through it. Its temperature should not exceed 35 degrees Celsius. The case is made of stainless steel and resistant to mechanical stress.

Main characteristics:

1. Head (max), m - 35.
2. Throughput, cu. m / hour - 3.
3. Power, W - 850.
4. Water temperature, ° C - 35.
5. Weight, kg - 13 kg.

TOP 3 best low-cost borehole pumps

Aquarius BTsPE 0.32-40U

As a budget model for giving, you can use this model from a well-known brand with 680 W motor.

With proper connection, a pressure of 60 meters is provided, about 3 cubic meters / m of clean water is pumped per hour.

Such a pump is also suitable for creating an automated water supply system (with an additional installation of a check valve), and for watering or irrigating a garden / vegetable garden.

The pump is not afraid of power surges and provides constantly good water pressure.. However, with constant problems with the supply of electricity, it is better to take care of installing a stabilizer in advance.

The device is equipped with a network cable, the length of which is 40 meters, which eliminates the need for an extension cord.

There is overheating protection provided by a built-in thermostat.

Main characteristics:

1. Head (max), m - 60.
2. Throughput, cu. m / hour - 3.
3. Power, W - 680.
4. Water temperature, ° C - 35.
5. Weight, kg - 12.2.

UNIPUMP ECO 0 (370W)

Another budget pump model for wells with a diameter of 10 cm or more. Differs in small energy consumption and good performance indicators - per hour the pump is capable of pumping up to 4.8 cubic meters / m of clean water, the temperature of which should not exceed 35 degrees.

The pump has a vertical installation principle, the body is made of corrosion-resistant stainless steel, which means that the pump will work for more than one year.

The internal mechanism is assembled from environmentally friendly materials, so you can not be afraid to use such a device to work with drinking water.

The immersion depth is 20 meters, installation and use are as simple as possible, the pump does not make noise during operation. There is a smooth start of the engine and protection against overheating.

Main characteristics:

1. Head (max), m - 35.
2. Throughput, cu. m / hour - 4.8.
3. Power, W - 370.
4. Water temperature, ° C - 35.
5. Weight, kg - 11.5.

Aquarius BTsPE 0.5-16U

This is the smallest model in the Aquarius line, which does not affect pump performance.

The 400 W motor pumps up to 3.6 m3 with a maximum head of 27 meters.

The device is used in wells with a diameter of 11 cm or more with clean water, where the content of impurities is minimal.

The engine starts smoothly, with gradual acceleration, there is overheating protection - the thermal relay will stop the system when the critical temperature is reached.

The pump has a low noise level during operation.

Like all centrifugal pumps, it does not create vibrations, does not silt up the well and does not cause the well filter to fall asleep, which means it does not reduce the quality of drinking water.

In the kit, the manufacturer offers a cord of 16 meters.

Main characteristics:

1. Head (max), m - 27.
2. Throughput, cu. m / hour - 3.6.
3. Power, W - 400.
4. Water temperature, ° C - 35.
5. Weight, kg - 7.7.

TOP 3 best pumps for a well 40 m deep

Aquario ASP 1E-55-75 (700 W)

If you are the owner of a deep well with a diameter of 10 cm, then you should consider this model submersible pump with vertical installation.

Due to the engine with a power of 700 W, up to 3 cubic meters / m are pumped per hour with a maximum head of 60 meters.The immersion depth of this model is 50 meters, the device is designed to work with clean water, the temperature of which does not exceed 35 degrees.

The body is made of stainless steel, is not afraid of corrosion, which indicates a long service life of the pump.

The check valve prevents water from being discharged through the pump into the well after the pump has stopped.

The use of environmentally friendly materials allows you to use the device for pumping drinking water to a private house or cottage.

There is a built-in thermal switch that will protect the engine from overheating and will not allow it to start until the system has completely cooled down.

Main characteristics:

1. Diving depth - up to 50 meters.
2. Head (max), m - 60.
3. Throughput, cu. m / hour - 3.
4. Power, W - 700.
5. Water temperature, ° C - 35.

Aquario ASP 1.5C-60-75 (920 W)

Submersible pump for a summer house or a cottage with a maximum immersion depth of up to 50 meters and jet head of 77 meters.

Suitable for installation in a well or well with a sand content of up to 120 grams per cubic meter. It performs up to 30 launches per hour, providing water within 3 cubic meters, while consuming 920 watts.

Quiet operation, very easy installation, complete with 45m power cord.

Also included is a remote control. The pump is of very simple design, consisting of a single-phase electric motor and a pump made of high quality polymers framed by a stainless steel casing.

Liquid intake is carried out from the middle of the body, which is favorable for work in the presence of bottom turbidity. It is not afraid of power surges, so the installation of a stabilizer is not required.

Main characteristics:

1. Head (max), m - 77.
2. Throughput, cu. m / hour - 3.
3. Power, W - 920.
4. Water temperature, ° C - 35.
5. Sand content - up to 120 g per cubic meter.

VORTEX CH-60 (800 W)

Pump for wells and wells with a diameter of 75 mm, which pumps lightly polluted or clean water to a private house or garden plot (watering/irrigation).

It plunges to a depth of 50 meters, the maximum pressure reaches 60 meters. About 3 cubic meters / m are pumped per hour thanks to an 800 W engine.

There is protection against overheating, the thermal relay will not allow the engine to work when the critical temperature is reached.

The body of the model is made of stainless steel, and the pump part has a chrome finish.

This helps the pump provide reliable, trouble-free operation and a long service life.

The water intake in this device is carried out in the middle, between the engine and the impeller block. You can safely connect 2-3 private water supply points to such a pump and provide your home with clean water.

Main characteristics:

1. Diving depth - up to 50 meters.
2. Head (max), m - 60.
3. Throughput, cu. m / hour - 3.
4. Power, W - 800 W.
5. Water temperature, ° C - 35.

TOP 3 best pumps for a well with a depth of 25-30 m

JILEX Water jet PROF 55/50 (600 W)

Submersible pump for wells and wells with clean cool water for organization automatic watering of the garden or garden.

A 600 W motor provides a head of up to 50 meters, pumping up to 3.3 cubic meters per hour.

The pump can be submerged to a depth of 30 meters. All pump operation is automated, there is no need to monitor the water level in the source, as the model is equipped with a float switch.

Keep in mind that in order to create a complete automation of the water supply to a private house, you will need to purchase some details..

The pump is completed with a cable 20 meters long, connected to a voltage of 220/230 V.

It does not tolerate regular power surges well, so it is recommended to install a stabilizer so that the engine does not burn out. The pump housing is made of stainless steel, which is not afraid of rust and ensures a long service life.

Main characteristics:

1. Diving depth - up to 30 meters.
2. Head (max), m - 50.
3. Throughput, cu. m / hour - 3.3.
4. Power, W - 600 W.
5. Water temperature, ° C - 35.

JILEX Water jet PROF 110/110 (1800 W)

The model is easy to use and install, is a centrifugal pump with multi-stage cleaning for diving to a depth of 30 meters.

The pump has a wetted motor, condenser and working floating wheels. A device is used for pumping exceptionally clean water from wells and wells with a diameter of 11 centimeters or more.

Buyers note the high build quality, thanks to which the pump will last a long time without breakdowns..

The body of the device and all used bearings are made of stainless steel, the wheels are made of bronze, the seals are made of cermet.

One of the advantages of the model is a long power cord (70 meters), so the pump can be connected directly to a power source, without using an extension cord..

It tolerates minor power surges well, in this case it is not necessary to install a stabilizer.

Main characteristics:

1. Diving depth - 30 meters.
2. Head (max), m - 110.
3. Throughput, cu. m / hour - 6.6.
4. Power, W - 1800.
5. Water temperature, ° C - 35.

JILEX Water jet PROF 55/75 (900 W)

Reliable pump for a well or well, which is designed to supply water to the house, where a significant number of people live.

Suitable for installation in a source with a diameter of 10 cm or more, it can pump exceptionally clean water, as it is not equipped with fine filters. Large particles can cause clogging and damage to the engine.

The pump is submerged to a depth of 30 meters, pumping 3.3 cubic meters per hour with a maximum head of up to 75 meters.

For proper, stable, durable operation, you should take care of voltage stabilization in advance, as the engine does not tolerate regular surges and can fail.

The manufacturer in the technical data sheet indicates a service life of three years, but buyers claim that the pump is able to work twice as long.

Main characteristics:

1. Head (max), m - 75.
2. Throughput, cu. m / hour - 3.3.
3. Power, W - 900.
4. Water temperature, ° C - 35.
5. Weight, kg - 11.7.

TOP 3 best pumps for a well with a depth of 15-20 m

BELAMOS 3SP 60/1.8 (600 W)

One of the main advantages of the model, which is noted by buyers, is ease of maintenance and complete maintainability - to replace the screw mechanism, you do not need to contact a service center, you can do it yourself.

The 600 W motor is capable of withstanding up to 20 starts per hour, pumping about 1.8 cubic meters / m of clean water with temperatures from zero to 35 degrees. The maximum head at the same time reaches 60 meters.

The pump is used for individual water supply systems, creating irrigation or irrigation.

It is installed in wells and wells with a diameter of 8 cm or more; it can also be placed in natural sources. There is a built-in motor thermal protection, which is in an oil bath for better cooling and water protection.

Main characteristics:

1. Head (max), m - 60.
2. Throughput, cu. m / hour - 1.8.
3. Power, W - 600.
4. Water temperature, °C - 35..
5. Weight, kg - 9.7.

UNIPUMP ECO 2 (750 W)

The pump is made of environmentally friendly materials, so the water from it can be be used not only for household needs, but also for drinking.

It does not make noise during operation, it is connected to a voltage of 220/230 V. It is installed in wells and wells with a diameter of 11 cm or more, it can participate in the organization of watering or irrigation.

Good performance figures. When immersed to a depth of 20 meters, it provides up to 4.8 cubic meters per hour with a head of 60 meters.

Not suitable for use in muddy or sandy springs, the total amount of impurities should not exceed 100 g per cubic meter.

The engine starts smoothly, with a gradual increase in speed, there is protection against overheating. Comes with a 30m power cable.

Main characteristics:

1. Head (max), m - 60.
2. Throughput, cu. m / hour - 4.8.
3. Power, W - 750.
4. Water temperature, ° C - 35.
5. Weight, kg - 17.

DELTA NP2-55/60 (900 W)

Vertically mounted submersible pump with 900 W motor. Drops on depth up to 15 meters, designed for pumping clean water with a temperature of up to 35 degrees.

It gains 3.3 cubic meters per hour with a maximum head of 60 meters.

Stainless steel body, resistant to corrosion and able to withstand a long service life.

The pump belongs to inexpensive models, can be installed in private houses and cottages, in summer cottages, used in watering and irrigating the garden / vegetable garden.

The engine is cooled by the jet that passes through it, there is a thermal switch to stop the system in case of overheating.

No noise, easy to use and install. Comes with a 30m cord.

Main characteristics:

1. Immersion depth - 15.
2. Head (max), m - 60.
3. Throughput, cu. m / hour - 3.3.
4. Power, W - 900.
5. Water temperature, ° C - 35.

Which firm to choose?

In order for the pump to last a long time and not cause trouble, constantly breaking down, it is not recommended to save on quality.

Experts advise choosing among popular brands that are time-tested.

They manufacture both pumps for wells and wells. Their products are renowned for their good performance and reliability.

In the ranking of the best manufacturers, such companies as Grundfos from Denmark, domestic VORTEX, Aquarius, Gileks, German Denzel, Karcher are in the lead..

Customer Reviews

Useful video

From the video you will find out which well pump is better: