TOP 17 best infrared heaters for the home: rating 2024-2025 and which ceiling or wall to choose for a summer residence

1Infrared heaters appeared on the market relatively recently, but have already won the recognition of users.

This is a good way to heat small spaces without huge electricity bills.

The article talks about the nuances that you need to pay attention to when buying such a device, and presents models whose advantages far outweigh their disadvantages.

Rating TOP-17 best infrared heaters 2024-2025

In this rating, we have collected for you the best infrared heaters, marked by positive feedback from both ordinary users and specialists.

Place Name Price
TOP 3 best infrared heaters for summer cottages in price-quality ratio
1 Ballu BIH-AP4-1.0 Ask for a price
2 Timberk TCH A5 1000 Ask for a price
3 Ballu BIH-AP4-0.8 Ask for a price
TOP 3 best ceiling infrared heaters
1 Ballu BIH-APL-0.6 Ask for a price
2 Almac IK11 Ask for a price
3 Ballu BIH-APL-1.5 Ask for a price
TOP 3 best wall-mounted infrared heaters
1 Electrolux EIH/AG2-2000E Ask for a price
2 Ballu BIHP/R-2000 Ask for a price
3 Ballu BIH-L-3.0 Ask for a price
TOP 3 best floor infrared heaters
1 Electrolux EIH/AG2-1000E Ask for a price
2 Electrolux EIH/AG2-1500E Ask for a price
3 Ballu BIH-LM-3.0 Ask for a price
TOP 2 best film infrared heaters
1 Velvet Season Bridge Ask for a price
2 TeploKryma Rybka EO 448/2 Ask for a price
TOP 3 best infrared-convective heaters
1 Polaris PMH 1546 Ask for a price
2 Polaris PMH 1584 Ask for a price
3 STN R-1T Ask for a price

What to look for when choosing?

To choose the most suitable heater for you, pay attention to the following points:

  • Execution. There are ceiling, wall or floor views. The floor version is suitable for moving from room to room. Ceiling heaters have a larger radiation range, suitable for large rooms. If there are children in the family, then it is better to choose a ceiling or wall-mounted option to prevent accidental contact with the heating device.
  • Power. In rooms with an area of ​​​​more than 10 square meters. m. it is better to use devices with a power of 1000 watts or more. From 15 sq. m. - 1500, and from 20 sq. m. bought heaters with a capacity of 2000-3000 watts.
  • Moisture protection. If you plan to use a heater on the veranda or in the bathroom, then this is a must-have factor in choosing.
  • Degree of protection. Good heaters are equipped with overheating protection - this will prevent them from burning out under heavy load. Floor-standing models must have an automatic tip-over shut-off.
  • Additional features. Does your model have a thermostat that will keep the temperature constant? Can the power and temperature be adjusted according to your needs? Has a timer been set to schedule the appliance to turn on or off?

2

Overview of the best models in terms of price-quality ratio

Ballu BIH-AP4-1.0

Infrared heater that can be placed on the wall or ceiling. Heating power in 1000 W3 Sufficient for rooms up to 20 sq. m. The case is protected from moisture. Mechanical control, with one mode.

The device works silently and heats up quickly, maintains a constant temperature well. There is no foreign smell. This is a great option for heating a living room in the country.

The kit includes swivel brackets and a sealed switching unit. Works from a network of 220 W. It does not collect dust and is easy to care for. The laconic design is not striking and does not reflect on the design of the room.

Characteristics:

  • What area heats up - up to 20 sq. m.
  • Modes - 1.
  • Degree of protection - from moisture.
  • Dimensions - 13x119x4 cm.
  • Weight - 2.7 kg.
pros
  • efficiency;
  • concise design.
Minuses
  • when cooling, clicks are sometimes heard;
  • wires, switch and thermostat are not included and must be purchased separately.

Timberk TCH A5 1000

Infrared heater with a power of 1000 W, designed to heat small rooms up to 12 square meters. m.4 Mechanical control, there is one mode of operation.

Powered by 220 W, the device is placed on the ceiling or wall. The minimum height of fasteners is from 180 centimeters. The case is protected from moisture, does not accumulate dust on the surface. Devices can be combined into a common group with a total power of up to 3000 W.

A remote control unit and a room thermostat can be connected to the heater. It features silent operation, quickly heats objects in the room, the heat from which passes into the air. Can be used in a living or technical room, on the veranda of a country house.

Characteristics:

  • What area heats up - up to 12 sq. m.
  • Modes - 1.
  • Degree of protection - from moisture.
  • Dimensions - 115.20 × 14.20 × 5 cm.
  • Weight - 4 kg.
pros
  • heating immediately after switching on;
  • simple, discreet design;
  • simple installation.
Minuses
  • crackling when the device cools down.

Ballu BIH-AP4-0.8

This is one of the most compact and thin infrared heaters. Power of 800 W is enough for heating5 rooms up to 16 sq. m.

The case is painted with heat-resistant paint, which does not darken over time. There is protection against moisture and dust, so that the heater can be used even outdoors. The body and other elements are made of stainless steel.

This is an excellent option for additional heating of rooms with high ceilings or poor-quality thermal insulation. The kit includes swivel brackets that allow you to adjust the heating angle and ensure easy installation.

The device is placed on the ceiling or wall (height from 240 to 350 centimeters is taken into account). During operation, the heater does not make noise, it heats up quickly. The white-gray color scheme does not attract the eye and does not stand out from the general interior.

Characteristics:

  • What area it heats - up to 16 sq. m.
  • Modes - 1.
  • Degree of protection - from moisture and dust.
  • Dimensions - 106x13x4 cm.
  • Weight - 2.3 kg.
pros
  • concise design;
  • low consumption;
  • high degree of moisture and dust;
  • can be used outdoors.
Minuses
  • The set does not include a thermostat.
  • fixings are visible on the ceiling or walls.

Overview of the best ceiling models

Ballu BIH-APL-0.6

Infrared heater with a trapezoidal body, which makes the device even more inconspicuous in the interior6. Has built-in brackets and all mounting kit included.

The body is made of stainless steel, protected from moisture and coated with a special heat-resistant paint that does not darken over time. Power of 600 W applies to the heating area up to 6 square meters. m. Powered by a network of 220 watts. The device is placed on a wall or ceiling, at a height of 240 to 350 centimeters.

Mechanical control with one mode of operation. It works quietly, heating starts immediately after switching on. Does not emit odors during operation.

Characteristics:

  • What area heats up - 6 sq. m.
  • How many modes - 1.
  • Degree of protection - from moisture.
  • Dimensions - 88.50x4x13 cm.
  • Weight - 2.2 kg.
pros
  • compact dimensions;
  • form for maximum invisibility;
  • economy.
Minuses
  • slight crackling when cooling;
  • fasteners get hot.

Almac IK11

Infrared ceiling heater for rooms with high ceilings or low-quality thermal insulation7.

The maximum placement height is 350 centimeters. In the kit, in addition to the instruction manual, there is a mounting kit.

The power of the device in 100 W heats the area up to 20 square meters. m. Powered by 220 watts. Mechanical control, with one mode of operation, the case is protected from moisture. The coating does not collect dust, it is easy to wipe.

Works quietly, no smell. Installation is easy, compact dimensions do not distinguish the device in the general interior. Does not dry the air, the room warms up evenly.

Characteristics:

  • What area heats up - 20 sq. m.
  • How many modes - 1.
  • Degree of protection - from moisture.
  • Dimensions - 133x3x16 cm.
  • Weight - 3.3 kg.
pros
  • profitability;
  • simple installation;
  • compact dimensions.
Minuses
  • there are no wires included;
  • no wall mounts.

Ballu BIH-APL-1.5

Powerful (1500 W) infrared heater designed to heat an area up to 15 sq. m.8

Mechanical control, with one mode of operation. Silent, heating of surfaces and objects begins immediately after switching on. The temperature is evenly distributed.

The device has built-in brackets. The package includes a mounting kit, the heater can be placed on the ceiling or wall (fixation height - from 240 to 350 centimeters).

The case is trapezoidal, with protection against moisture. Dust does not accumulate. Suitable for installation in both residential and technical or office premises. Works quietly, without drying up the air in the room.

Such a device significantly reduces the cost of utilities. Installation is easy, you can install a thermostat.

Characteristics:

  • What area heats up - 15 sq. m.
  • How many modes - 1.
  • Degree of protection - from moisture.
  • Dimensions - 163x13x4 cm
  • Weight - 4.2 kg.
pros
  • profitability;
  • shape and size are not distinguished;
  • quiet work.
Minuses
  • The kit does not include a thermostat and wires;
  • When first turned on, there may be an unpleasant odor.

Overview of the best wall models

Electrolux EIH/AG2-2000E

Wall-mounted infrared heater from Electrolux for wall and floor placement has a power of 2000 W9 and is suitable for heating an area of ​​25 sq. m. There is a power adjustment that ensures the operation of the device in two modes: 2000/1000 W.

Electronic control, there is a display, the user can set the desired temperature. There is a timer with a limit of 24 hours.The case is protected from moisture, the wheels are placed at the bottom. When the device overheats, the lock is activated and the heater automatically turns off.

The kit includes a thermostat. The system "Parental control" is installed. The heater starts to heat up immediately after switching on. Convection evenly distributes heat throughout the room.

Characteristics:

  • What area heats up - 25 sq. m.
  • How many modes - 2.
  • Degree of protection - from moisture, from overheating.
  • Dimensions - 80 × 41.30 × 11.20 cm.
  • Weight - 5.8 kg.
pros
  • power adjustment;
  • thermostat included;
  • efficiency.
Minuses
  • bright blue LED menu;
  • short cord.

Ballu BIHP/R-2000

This model works on the same principle as the previous one: infrared radiation heats surfaces10 and objects, and convection evenly distributes heat throughout the room.

Includes thermostat, floor-mounted chassis and wall-hanging bracket.

The power of the device is 2000 W, this is enough for 25 square meters. m. heated area. The power can be adjusted (1000/2000 W). There is a temperature adjustment. The case is waterproof, overheating protection and automatic restart function are installed.

Characteristics:

  • What area heats up - 25 sq. m.
  • How many modes - 1.
  • Degree of protection - from overheating, from moisture.
  • Dimensions - 80 × 41.30 × 11.10 cm.
  • Weight - 5.4.
pros
  • does not overheat;
  • economy of use due to power adjustment;
  • thermostat included.
Minuses
  • when cooling, it makes a slight crack;
  • short power cord.

Ballu BIH-L-3.0

Infrared heater with quartz type heating element. 3000 watts of power is enough11 for heating an area of ​​30 sq. m.

Placed on the wall or floor of the room. A good degree of protection against moisture allows the device to be used in semi-open rooms, for example, on a veranda.

Convective cooling protects against overheating. There is power control and a thermostat. The device can be rotated to the desired angle. Mechanical control, with one mode of operation.

Designed for use in rooms with ceilings no higher than 4.5 meters. The protective grid will not allow the child to get burned if accidentally touched. When tilted, the device turns off.

Characteristics:

  • What area heats up - 30 sq. m.
  • How many modes - 1.
  • Degree of protection - from moisture, from overheating.
  • Dimensions - 94x18x9 cm.
  • Weight - 4.1.
pros
  • good degree of protection;
  • thermostat included;
  • power adjustment;
  • efficiency.
Minuses
  • crackling on cooling.

Review of the best floor models

Electrolux EIH/AG2-1000E

This model is designed for outdoor placement in rooms up to 20 sq. m. The kit also includes a bracket12 for attaching the heater to the wall.

The power of the device is 1000 watts. There is a power adjustment (500/1000 W). Installed thermostat. Electronic control, there is a display and the ability to independently set temperature indicators.

The timer has a limit of up to 24 hours. The system "Parental control" is installed, in case of overheating the heater automatically turns off. The case is protected from moisture. Refers to infrared-convective heaters.

Characteristics:

  • What area heats up - 30 sq. m.
  • How many modes - 2.
  • Degree of protection - from moisture and overheating.
  • Dimensions - 48? 41.30? 11.20 cm.
pros
  • temperature control;
  • overheat protection;
  • compact size.
Minuses
  • the rear panel gets very hot;
  • sometimes the thermostat works with an error.

Electrolux EIH/AG2-1500E

Infrared-convective heater with a power of 1500 watts. Power adjustment allows you to select also 750 W13. Suitable for heating an area of ​​20 sq. m. You can place the device on the floor (there are wheels included) and on the wall (bracket).

Electronic control, with two modes of operation. There is a timer up to 24 hours, manual temperature control. The device is protected from overheating and automatically turns off when a critical point is reached if the thermostat fails.

There is an automatic restart function, parental control. Works quietly, odorless, does not dry the air.

Characteristics:

  • What area heats up - 20 sq. m.
  • How many modes - 2.
  • Degree of protection - from moisture and overheating.
  • Dimensions - 64 × 41.30 × 11.20 cm.
  • Weight - 3.8 kg.
pros
  • efficiency;
  • temperature control;
  • overheat protection.
Minuses
  • bright display;
  • short power cord.

Ballu BIH-LM-3.0

Power adjustment allows you to set three operating modes: 1000/2000/3000 W. Heats up to 30 sq. m14. Placed exclusively on the floor. There are wheels and tilt adjustment. Quartz type heating element installed.

When tilted, the device turns off. Mechanical control, with one mode of operation. The air does not dry, heating starts immediately after switching on, the operation is silent, almost imperceptible.

The case is protected from moisture, use on a balcony or a verandah is allowed. Quartz lamps are protected by a grill, the body is made of steel.

Characteristics:

  • What area heats up - 30 sq. m.
  • How many modes - 1.
  • The degree of protection is against overheating.
  • Dimensions - 48.50x80x59 cm.
  • Weight - 5.3 k.
pros
  • power adjustment;
  • turns off when dropped
  • efficiency.
Minuses
  • short power cord.

Overview of the best film models

Velvet Season Bridge

Infrared film heater with a power of 450 W. Attaches to the wall. Works from a network of 220 W. Enough15 for heating an area of ​​15 sq. m. Does not dry the air, suitable for any interior.

Heat is distributed evenly, providing good heating. Economical in use due to low power. Suitable for use in the bedroom or children's room.

Characteristics:

  • Power - 450 watts.
  • How many modes - 1.
  • Dimensions - 58 × 120 cm.
  • Surface heating - 60-100 degrees.
  • Weight - 340 grams.
pros
  • inconspicuous;
  • does not dry the air and does not burn out oxygen.
Minuses
  • low power;
  • short power cord.

TeploKryma Rybka EO 448/2

A great option for a child's room or bedroom. Does not burn with a light touch.16 A power of 450 W is enough to heat an area of ​​​​15 square meters. m. Does not affect air performance, you can not use a humidifier.

Connects to a 220 W network. Placed on the wall, heats evenly and distributes heat throughout the room, maintaining a comfortable temperature. In case of overheating, it turns off automatically.

Characteristics:

  • What area heats up - 15 sq. m.
  • Power - 450 watts.
  • How many modes - 1.
  • Degree of protection - protection against overheating.
  • Dimensions - 60x100x3 cm.
  • Weight - 650 grams.
pros
  • compactness. stealth;
  • overheat protection;
  • efficiency.
Minuses
  • power cord 1 m long;
  • little power.

Review of the best infrared-convective models

Polaris PMH 1546

The floor infrared-convective heater with a power of 1500 W heats an area up to 24 sq. m.17

Infrared radiation heats surfaces and objects, and convection evenly distributes heat around the entire perimeter, maintaining a comfortable temperature. The mikathermal heating element demonstrates high efficiency.

Power is adjustable, you can set 1500 or 1000 watts. Mechanical control, temperature control, built-in thermostat. In case of severe overheating or tipping over, the device turns off. The housing has a compartment for a power cord. The device moves on wheels.

Characteristics:

  • What area heats up - 24 sq. m.
  • How many modes - 2.
  • The degree of protection is against overheating.
  • Dimensions - 45x60x18 cm.
  • Weight - 3.7 kg.
pros
  • efficiency;
  • temperature and power adjustment;
  • compact size.
Minuses
  • slight crackling on cooling.

Polaris PMH 1584

Another model of a floor infrared convective heater with a power of 1500 W for heating an area up to 24 sq. m.18

Infrared radiation heats surfaces and objects, and convection evenly distributes heat around the entire perimeter, maintaining a comfortable temperature. The mikathermal heating element demonstrates high efficiency.

Power is adjustable, you can set 1500 or 1000 watts. Mechanical control, built-in thermostat. Works from a network of 220 W. In case of severe overheating or tipping over, the device turns off. The housing has a compartment for a power cord. The device moves on wheels.

Characteristics:

  • What area heats up - 24 sq. m.
  • How many modes - 2.
  • The degree of protection is against overheating.
  • Weight - 3.2 kg.
pros
  • light, compact;
  • efficiency;
  • power adjustment.
Minuses
  • switched off only from the socket.

STN R-1T

Great option for small spaces.Placed on the wall, due to the laconic design almost19 invisible. It works silently, does not emit odor, does not dry the air in the room. The power of the device is 230 W.

There is a thermostat. The case is protected from dust and moisture, the surface is easy to care for. Mechanical control, with one mode of operation. Works from a network of 220 W, economically consumes electricity. Suitable for additional room heating.

Characteristics:

  • What area heats up - 4 sq. m.
  • How many modes - 1.
  • Degree of protection - from moisture.
  • Dimensions - 100x16x3.50 cm.
  • Weight - 3 kg.
pros
  • simple, reliable, functional device;
  • small power consumption.
Minuses
  • not detected.

Advantages and disadvantages of infrared heaters

The advantages include:

  • direct heating - the user feels warm immediately after switching on, and only then does the air from the walls and floor begin to warm up;
  • heat is radiated already after 30 seconds after switching on;
  • low power consumption;
  • heat is distributed evenly, warm air does not go to the ceiling;
  • there is the possibility of local heating;
  • can be used outdoors;
  • environmentally friendly and safe;
  • long service life.

Of the minuses note:

  • when turned off, the temperature drops quickly;
  • heating only within the radius of action;
  • prolonged intense exposure is not safe;
  • tubular models shine brightly.

20

The principle of operation of an infrared heater

The infrared heater works on the principle of solar radiation.

Infrared rays heat surfaces and objects within their range, after which they give off their heat into the air. It spreads evenly, maintaining a comfortable temperature in the room.

When turned on, heat is first felt locally and only then passes into the air.

The operation of such devices is not accompanied by noise, oxygen in the room is not burned out. With a built-in thermostat, the device will turn off when the desired indicators are reached and turn on again as soon as the air cools down.

Types of infrared heaters

There are three types of infrared heaters:

  • electrical - they are most often used for heating residential or office premises. They are ceramic (in the form of a panel), carbon (with a tubular element) and film, characterized by flexibility and ease of installation;
  • gas - such models use gas fuel as a power source. They are installed in production, in workshops and outdoors. Such devices are large in size and have excellent thermal power;
  • diesel (or kerosene) - they are used for drying wood or in the construction of large objects to dry coatings. In terms of power, they are close to gas ones, but much more compact in size.

21

Quartz or infrared heater - which is better?

If we compare an infrared heater and a quartz heater, then the advantage is clearly behind the first. It is lighter, easier to manage, has no special requirements for the mounting location (quartz ones need a strong wall that can withstand the heavy weight of the device).

The energy efficiency of both devices is the same, while the infrared heater can be used outdoors.

The outer case of infrared devices heats up to 50-60 degrees, but quartz devices can burn your hand (their heating temperature is up to 90 degrees). The fire hazard of quartz heaters is higher, but in terms of strength they are much better than their rival, able to withstand shock and falling from a height.Infrared heaters are not so resistant to mechanical damage.

Customer Reviews

Below are customer reviews of the models presented here:

{{ reviewsOverall }} / 5 Owner rating (2 votes)
Brand/Model Rating
Number of voters
Sort by:

Be the first one to leave a review.

user avatar user avatar
Checked
{{{ review.rating_title}}}
{{{review.rating_comment | nl2br}}}

show more
{{pageNumber+1}}
Add your review!

Useful video

About the features of infrared heaters:

See also:

Leave a reply

Kitchen

Electronics

Automobile