TOP 15 best UPS for a gas boiler: 2024-2025 rating by price / quality

Even the most sophisticated and modern heating system does not like power surges and frequent power outages.Think: maybe it is worth buying and installing an uninterruptible power supply? This device will help you ensure the operation of circulation pumps in case of sudden power problems, as well as minimize the risk of breakdowns of your unit. But few people understand such devices, which is why they are pulling with the purchase. There will be no more “excuses”: we figured out all the intricacies of the UPS operation for you, chose some of the most interesting models in terms of functionality, and present to your court a detailed selection listing the advantages and disadvantages of each model.

Rating of the best UPS for gas boilers for 2024-2025

Place	Name	Price	Rating
The best UPS for a gas boiler by price / quality for 2024-2025
1	Energy Pro 1700	Ask for a price	4.9 / 5
2	Powercom RAPTOR RPT-1000A	Ask for a price	4.8 / 5
3	IPPON Back Basic 850	Ask for a price	4.7 / 5
The best UPS with an external battery for a gas boiler
1	Energy Garant 500	Ask for a price	4.9 / 5
2	Hiden Control HPS20-0312	Ask for a price	4.8 / 5
3	RESANTA UBP-1000	Ask for a price	4.7 / 5
Best double conversion UPS for gas boiler
1	IPPON Innova G2 1000	Ask for a price	4.9 / 5
2	Stihl SW1000L	Ask for a price	4.8 / 5
3	CyberPower OLS1000ERT2U	Ask for a price	4.7 / 5
The best interactive UPS for a gas boiler
1	Energy Pro 500	Ask for a price	4.9 / 5
2	IPPON Back Basic 650	Ask for a price	4.8 / 5
3	BASTION SKAT-UPS 800/400	Ask for a price	4.7 / 5
The best inexpensive UPS for a gas boiler
1	Powercom RAPTOR RPT-600A	Ask for a price	4.9 / 5
2	UPS Energy 600	Ask for a price	4.8 / 5
3	SVEN Pro 400	Ask for a price	4.7 / 5

How to choose a UPS for a gas boiler?

• UPS type. There are 3 types of uninterruptible power supplies: offline, online and line-interactive. The most affordable are offline type UPS. At a price they are the most affordable and easy to use: when the electricity is turned off, the system starts to be powered from the battery (batteries). As soon as electricity appears again, the devices reconnect to the network. But the lack of a voltage stabilizer is a huge minus: if power surges are too frequent, there is a high risk of losing both the device itself and the boiler. In line-interactive type devices, a transformer is installed at the input, which improves the signal and corrects errors, protects connected devices from power surges. The online type is the best and most reliable. The only one of all can work with generators connected to it.
• Power. If you need to connect several devices, you need to choose a powerful UPS: about 50,000 VA.
• Rated input voltage. These data depend on the number of phases in the room where the gas boiler is located. For an apartment, a single-phase UPS source with a voltage of 220 V will suffice, for a three-phase boiler - 380 V.
• Input voltage stabilization. The smaller the percentage, the clearer the output current characteristics will be.

The best UPS for a gas boiler by price / quality for 2024-2025

1. Energy Pro 1700

One of the best interactive UPS for an uninterruptible power supply system with external batteries. Allows you to choose the right number of batteries for the required operating time. The PWM converter is digital, due to which the inverter produces a pure sine wave. LCD screen.

Protection against short circuit, overload, high-voltage impulses is installed. The fuse is automatic. The output voltage stability (battery mode) is 5% and the efficiency is 98%. The warranty period is 1 year, the service life is several times longer - 10 years, but only with proper operation.

The device is not picky about the frequency of the supply voltage and can be powered by any cheap generator without electronic frequency control. The built-in stabilizer is accurate (the error is only ± 5%), a system of intelligent charging and self-continuous testing is installed. The energy saving function allows you to optimize the consumption of electricity without wasting it.

Specifications:

• width: 417 mm;
• height: 222 mm;
• depth: 191 mm;
• weight: 10.9 kg.

2. Powercom RAPTOR RPT-1000A

One of the most bought models, judging by the reviews on the sites.Rugged housing, good stuffing, high-quality wires and connections, operating mode without disruption - what else do you need? A modern stabilizer maintains the output voltage according to the norm and does not waste battery life.

Devices connected to it will remain safe and sound: overload, high-voltage impulse or short circuit will bypass you. There are 3 output connectors, so there is more than enough space. The box is made of black durable plastic. In the event of a trouble, the device switches to battery operation in 4 ms, works autonomously for 20 minutes at a load of 100 watts. Due to the low noise level, it is suitable not only for the workplace, but also for the home.

The battery recharges in 4 hours. By the way, a failed battery can be replaced with another one - a trifle, but nice. Warranty - 24 months, country of origin - China.

Specifications:

• weight: 4.5. kg;
• total output power: 1000 VA;
• effective output power: 600W;
• min. input voltage: 160 V;
• Max. input voltage: 275 V.

3. IPPON Back Basic 850

What to tell about the IPPON Back Basic 850 UPS? Pretty much all the good stuff! Stylish external, not bulky, easy to set up and further use - this device is very convenient for the work area (cafe) and for use at home. From the interfaces there is USB, and from the functionality - all the necessary set. This includes protection against high-voltage impulses, and overload protection, and short circuit protection.

Remember: battery life at 70-100% load is not recommended. Type of output power connectors - IEC 320 C13, high efficiency - 95%. The operating time at half load is 2 minutes. The power cable is non-removable. Charging time from full discharge is 10 hours to 90% charge. You can independently adjust the parameters of the electric power supply system of the boiler.

Specifications:

• service life: 12 months;
• warranty period 1 year;
• noise level: 40 dB
• width: 100 mm;
• height: 143 mm;
• depth: 278 mm;
• weight: 5.15 kg.

The best UPS with an external battery for a gas boiler

1. Energy Garant 500

This UPS model copes with its task by five points. Pleasant appearance, functionality and high-quality components make the Garant 500 a serious competitor to all other UPSs on the market.

It is allowed to connect two sources of consumption, but make sure that the total load of the UPS is no more than 80%. The output signal shape when working from the battery is a pure sine wave. When operating from the network, a network sine wave is broadcast. Withstands large starting currents (two or three times), you can connect a submersible pump, for example. The appearance is very neat, so that the unit does not need to be hidden on the far shelf of the cabinet.

Specifications:

• output connectors: 1;
• output power (active): 300 W;
• output voltage stability (battery mode): 10%;
• lowest output frequency: 50Hz.

2. Hiden Control HPS20-0312

I like this device for its functionality and reliability. The Protherm 40 klo gas boiler plus two circulation pumps pulls without any problems. It switches to the battery instantly, nothing even happens on the operation of the boiler. The display is informative.

Quiet. The fan does not drum. The battery charges 10 amps, which is good because for some batteries this is the minimum value. Works with AGM 100A/h. Rated input voltage - 220 V, battery supply voltage - 12 V. Peak power - 300 V * A, two sockets.

Specifications:

• width: 310 mm;
• height: 125 mm;
• depth: 265 mm;
• output signal form: sinusoid;
• switching time to battery: 6 ms.

3. RESANTA UBP-1000

This specialized unit fully complies with the declared characteristics, is actively used in apartments, cottages, country houses and office kitchens. The convenient digital display helps to keep track of operating parameters.

The housing is made of impact-resistant plastic housing, so that all internal components are reliably protected from mechanical damage. Batteries must be purchased separately. The service life is long, the build quality is high. The output signal frequency is stable. You can use a pair of 12 batteries.There are several protection options: from overheating and other troubles. Manufacturer's warranty - 2 years.

Specifications:

• stabilization accuracy, %: 8;
• response time, ms: 4;
• weight, kg: 8.97 kg;
• battery capacity, Ah: 100.

Best double conversion UPS for gas boiler

1. IPPON Innova G2 1000

A double conversion UPS that will fit any expensive gas stove. Does not go crazy when running from a generator, there is a built-in AVR, almost silent. The price is acceptable.

Double conversion of input voltage. stable output voltage. The absence of relay clicks, since there is a different principle of voltage regulation. LCD screen for operation control and monitoring. If the input voltage is out of range, the UPS goes into double conversion mode with a transfer to the battery if necessary. Set the ECO mode - it is the most economical in terms of power consumption. This is achieved by turning off the voltage conversion while it is at normal values.

Specifications:

• output connectors: 4;
• battery-powered connectors: 4;
• output power: 1000 VA / 900 W;
• charging time: 4 hours

2. Calm SW1000L

Suitable not only for gas boilers, but also for other heating equipment, circulation pumps, water treatment systems and more. Attaches to the wall: for this there is a bracket on the back panel, and the parts for mounting are included in the kit and you do not need to buy them in addition.

There are 2 Euro sockets on the side. The UPS is connected to the network using a network cable with an euro plug. The device has a built-in charger (current 5 A), external batteries can be connected. The battery is charged in a cyclic mode at first, and then in a buffer mode. Depending on the battery temperature, automatic voltage adjustment also occurs. The device successfully protects you from short circuit, overload, "deep" discharge of the battery, high-frequency mains interference and surge voltage.

Specifications:

• input power factor: 0.99;
• warranty: 2 years;
• width: 357 mm;
• height: 379 mm;
• depth: 116 mm;
• weight: 7 kg.

3. CyberPower OLS1000ERT2U

This type of UPS has a double converter with a capacity of 1000 VA and, in general, is a high-quality and reliable device. It is 100% suitable for gas stoves, as it provides guaranteed protection for your gas stove from overloads and other problems. It is allowed to connect several more types of household appliances to the UPS.

The device independently analyzes the quality of the input voltage, and then chooses the mode in which the stove should work: in ECO mode or from the mains.Intelligent battery management. There are several modes: energy saving mode (ECO Mode) and (SBM) ensure safety. The switching time is flawless - zero, the sinusoidal signal is clean. The built-in network management card gives you access to a range of operations, including UPS remote management, online monitoring. There is noise filtering.

Specifications:

• width: 438 mm;
• height: 88 mm;
• depth: 430 mm;
• weight: 13.2 kg.

The best interactive UPS for a gas boiler

1. Energy Pro 500

Quality device at an affordable price. The kit is simple, but the box contains all the necessary screws and plugs, as well as a drilling template. The connector for connecting the power cable is located at the top of the case, but you can use any cable that is suitable in length.

There are two buttons: on / off sound and power saving. The design can either be hung or put on a table (there are 4 legs), but the owners advise just hanging it: this way the device makes less noise. Three-core power cable with a cross section of 0.5 sq. mm.

There are two bandages (with bolted connection). Five YHT72-15-2A relays and IRF3205 transistors from International Rectifier are installed. The LED display is very bright and beautiful. Pleases with the function of protection against high and low voltage. The entire power part of the UPS is well soldered and assembled. Warranty - 1 year, service life - 10 years (subject to operation in accordance with the instructions). There is a cold start function.Output voltage stability (battery mode) - 5%.

Specifications:

• width: 222 mm;
• height: 257 mm;
• depth: 150 mm;
• weight: 5 kg.

2. IPPON Back Basic 650

One of the most affordable units, which is suitable not only for a gas stove, but also for other peripheral computer and computing equipment. Your stove will be protected from radio frequency and electromagnetic interference, high voltage surges, fluctuations or complete loss of power in the outlet.

The design is reliable, but storage conditions must be observed: relative humidity range - 0-95% (condensation is not allowed), temperature range -15 - + 50 degrees (operating range - 0-40 ° C). The level of generated noise is low - less than 40 dB.

There is an LED indication: the green color of the light means that the device is powered from the mains, as well as the linear mode of operation. If it blinks, power is being supplied from the battery. The sound also works: a squeak every 10 seconds indicates that the battery is powered, every second - the battery is about to sit down. With a continuous signal, you should look for a malfunction. The input connectors are located on the back of the device, allowing you to connect up to 3 devices at the same time.

Specifications:

• total power: 650 VA;
• parameters: WxHxD: 100 x 143 x 278 mm;
• voltage stability: +/- 10%;
• rated frequency: 50 or 60 Hz.

3. BASTION SKAT-UPS 800/400

If you have a need to purchase a high-quality uninterruptible power supply for a stove, consider the SKAT-UPS 800/400 from the Russian research and production company BASTION. This model is suitable for both home and office kitchens. She needs a standard outlet.

Built-in stabilization, protection and battery charge - no complaints. There is a protected RJ-11 USB port for connecting to a PC. Power surges on the modem or telephone line are no longer scary for you. Recharges in 8 hours. Each mode is accompanied by light and sound indication. The output waveform is a stepwise approximation of a sine wave. Switchover time to battery is 6ms. The highest absorbed pulse energy is 320 J.

Specifications:

• width: 101 mm;
• height: 142 mm;
• depth: 298 mm;
• weight: 4.9 kg;
• warranty period: 12 months

The best inexpensive UPS for a gas boiler

1. Powercom RAPTOR RPT-600A

One of the best options for protection is a line-interactive UPS for your gas stove and all kinds of networking equipment. No more power failures! The cold start function allows you to turn on the UPS in the absence of mains voltage. Protection against short circuit, network overload, excessive increase or decrease in voltage in the mains is installed.A built-in voltage regulator is on every model and this one is no exception: it will help you not waste battery life.

There are 3 battery-backed output ports on the case, so it will be very easy to connect additional devices. The battery is automatically charged when switched off. The impulses are extinguished with a bang. Does not make noise during operation. The sockets are tight, the cables are held tightly in them and do not pop out. It squeaks when overloaded. The country of origin is China. Warranty - 24 months. Fully charged in 4 hours.

Specifications:

• depth: 278 mm;
• width: 100 mm;
• height: 140 mm;
• weight: 4.2 kg;
• noise level: 40 dB.

2. Energy UPS 600

If electricity is often cut off in your house, and you have expensive household appliances (the same gas stove of the latest model) - get yourself an IPB 600 from Energia. It is installed on the floor, a Euro socket with grounding (F7) is required for connection.

There is LED indication, as well as various types of protection: from a complete discharge of the battery, from overcharging the battery, from overload and short circuit. Connection to the network occurs through a non-removable network cable with a plug.

The manufacturer's warranty for the product is 1 year. The accumulator is internal, type — lead-acid unattended type AGM. Installed stabilizer and autotransformer with relay switches. Switches between operating modes quickly - 5-10 seconds.The mains cable with plug is non-removable.

Specifications:

• transfer time to battery: 0.01 ms;
• maximum power (kW): 0.56;
• rated input voltage: 220 V;
• number of batteries: 1 x 12V, 7 Ah.

3. SVEN Pro 400

Line-interactive UPS of small size, which performs the functions of a backup power supply and a voltage stabilizer at the same time. It takes 8 hours to fully charge the battery. The minimum output frequency is 49 Hz, the maximum output frequency is 51 Hz. The country of origin is China. Warranty - 24 months.

In the event of a power failure, the device switches on battery operation. There is only one output connector: you can connect the equipment you need to it in addition to the gas stove - a modem, TV, satellite dish adapter, office or home computer. Despite the simple appearance, this device is strong and well-assembled.

Informing about the modes (or mode) of the UPS operation is carried out using sound signals. Function of intellectual management of process of charging of batteries. SBM technology helps extend battery life.

Specifications:

• width: 100 mm;
• height: 145 mm;
• depth: 295 mm;
• weight: 3.6 kg.

Which firm to choose?

Devices from Energia (a large selection and good assembly), Powercom (a Taiwanese manufacturer of uninterruptible power supplies, which has established itself as a company that approaches business with all responsibility), RESANTA (the latest technologies are used in product development, service maintenance and operation) have proven themselves well. with buyers).

Useful video

Recommendations for choosing an IPB for a gas boiler can be viewed in the video below: