TOP 20 best electric boilers: 2024-2025 ranking by price / quality

If there is no access to the gas main, you will have to turn to an electric boiler. And this option is no worse: modern electric boilers are easy to use, affordable and safe.To choose the right model, you need to know at least the most important characteristics and parameters that you should focus on. We've done the bulk of the work by looking at several hundred models, and here's a list of the most popular models for 2022.

Rating of the best electric boilers for 2024-2025

Place	Name	Price	Rating
The best electric boilers by price / quality for 2024-2025
1	STOUT SEB-0001-000007	Ask for a price	4.9 / 5
2	EVAN Next 7	Ask for a price	4.8 / 5
3	Resource-ElectroTerm EVPM-9	Ask for a price	4.7 / 5
4	ZOTA Balance 9	Ask for a price	4.6 / 5
The best electric boilers for 220 V
1	Resource-ElectroTerm EVPM-3	Ask for a price	4.9 / 5
2	ERDO EVPM-NEXT-3 P	Ask for a price	4.8 / 5
3	Alvin EVP 3-EU	Ask for a price	4.7 / 5
4	Teplotech EVP-4,5	Ask for a price	4.6 / 5
The best electric boilers for 380 V
1	STOUT SEB-0001-000012	Ask for a price	4.9 / 5
2	Protherm Skat RAY 14 KE /14	Ask for a price	4.8 / 5
3	Resource-ElectroTerm EVPM-15	Ask for a price	4.7 / 5
The best electric boilers up to 6 kW
1	EVAN Warmos Start - 5	Ask for a price	4.9 / 5
2	Resource-ElectroTerm EVPM-4.5	Ask for a price	4.8 / 5
3	Protherm Skat RAY 6 KE /14	Ask for a price	4.7 / 5
The best energy-saving electric boilers
1	EVAN Next 3	Ask for a price	4.9 / 5
2	ZOTA Solo 3	Ask for a price	4.8 / 5
3	UralProm EVPM-3 kW	Ask for a price	4.7 / 5
The best inexpensive electric boilers
1	Electromash EVPM-6	Ask for a price	4.9 / 5
2	Pyramid EVN-6	Ask for a price	4.8 / 5
3	Galan OCHAG-3	Ask for a price	4.7 / 5

How to choose an electric boiler for heating a private house?

• Heating element: heating element, electrode or induction. Heating elements are more common than others: they allow you to use not only water, but also antifreeze, save energy, but require regular descaling. The induction element is more expensive and heavier.
• Number of circuits: a single-circuit boiler will heat a small living space - an apartment, for example. For the house you need a double-circuit apparatus.
• Power: calculation 1 kW per 10 square meters. Example: for a room of 80 square meters, a power of at least 8 kW is needed.
• Type of connection: devices with a power of up to 12 kW can be connected to both a single-phase and a three-phase network, more powerful devices can only be connected to a three-phase network.
• Installation type: floor and desktop. Wall-mounted ones need little space, but they are less powerful.

The best electric boilers by price / quality for 2024-2025

1 STOUT SEB-0001-000007

The first electric boiler that we will consider is a double-circuit STOUT SEB-0001-000007. Its design provides for wall mounting and operation from an electrical outlet. The maximum area of ​​the room that the boiler can effectively heat is 56 sq.m.

This model has a built-in expansion tank, circulation pump and electronic control. The heating element is built-in, type of electrical network: single-phase \ three-phase connection. Step power adjustment allows you to control and change the parameters of the heating boiler. This boiler has 3 power levels.

The outdoor temperature sensor shows the data, the room thermostat - indoor indicators. All data is displayed. The guarantee for this device is given for 24 months. Due to the system of automatic control of the operating parameters of the heating system installed in the boiler, it is highly economical, reduces energy costs, but is comfortable for the user.

Specifications:

• branch pipe for connecting the heating circuit: 3/4?;
• coolant temperature: 10 - 85 °С;
• dimensions: 420x765x300 mm;
• weight: 35 kg.

2. EVAN Next 7

This model is suitable for private houses, cottages, warehouses and small commercial premises. It can act both as a main and as a backup power source. An expansion tank with a volume of 12 liters is designed to drain excess water from the heating system when the total volume of liquid increases as a result of heating.

It consists of two parts connected by a flexible membrane: in one, hermetically closed, there is air under pressure, in the other, “excess” water enters, compressing the membrane.The system has protection against water overheating: a temperature sensor that reacts to a critical excess of the coolant temperature in the system and turns off the system without waiting for your command. Heating elements are block, made of stainless steel Backer. The boiler control is three-stage, the temperature is set using a thermostat (range from 30 to 85 degrees).

Specifications:

• HxWxD: 765x420x300 mm;
• weight: 35 kg;
• power: 7 kW.

3. Resource-ElectroTherm EVPM-9

Resurs-ElectroTherm EVPM-9 outwardly looks like a conventional boiler: a steel tank, a control panel fixed inside, tubular electric heaters mounted on the tank flange and a temperature-sensitive tube of the temperature controller. Electricity consumption is small: 9.45 kWh.

The outlet water temperature is from 35 to 85 degrees. Due to a good power indicator, the boiler will be able to warm a room with an area of ​​80-90 sq.m. Mains voltage is single-phase and three-phase. The device can be installed both in a closed and open water supply system in a residential building or in a production facility. Tubular heaters are responsible for heating.

The regulator knob is placed on the front of the case. On the side of the case there is a hole for entering the power cable and ground wire into the console. This model can be used not only in conjunction with solid fuel boilers, but also autonomously.Three-stage power adjustment allows you to control and change the parameters of the heating boiler.

Specifications:

• weight: 10 kg;
• overall dimensions: 170x230x650;
• rated power: 9 kW;
• rated voltage: 220/380 V.

4. ZOTA Balance 9

Safety, efficiency, reliability: all these are the defining characteristics of the ZOTA Balance 9 boiler. A small and fairly budget model with a power of 9 kW copes with heating rooms up to 90 square meters. Due to the special design of the heating element, the watt load is small.

Perfectly used together with a solid fuel boiler. The device operates in a single-phase alternating current network with a voltage ranging from 200 to 240 V. The manufacturer advises using demineralized water with a pH of 6.5-8.5 as a heat carrier. You can add a non-freezing coolant: a water-propylene glycol solution with a concentration of up to 1: 1 or a water-ethylene glycol solution.

The power can be adjusted according to your preferences. 3 modes of operation: switching is done using a special switch on the front panel. The design uses electromagnetic relays. You can use the boiler in the "warm floor" system and heating systems, where the circulation of the coolant is forced.

The rated current of the circuit breaker 1F / 3F is 50 A / 16 A. The cable cross-section for the machine is 45-50A.The grounding conductor must have the same cross section as the phase minimum. You can connect different thermostats: wired (ZT-02H), wireless (ZT-02W), Wi-Fi (ZT-02W Wi-Fi).

Specifications:

• weight: 9.5 kg;
• dimensions: 260x567x153 mm;
• number of power steps: 3;
• thermal power: 3 - 9 kW.

The best electric boilers for 220 V

1. Resource-ElectroTherm EVPM-3

Of the best boilers for 220 V, the first place is occupied by the domestic Resource-ElectroTerm EVPM-3. By purchasing this model, you get not only a high quality product, but also a guarantee that this product is certified and has all the necessary documentation. The silver-colored elongated steel box fits perfectly into a small room.

Suitable for both residential and non-residential premises: cottages, country houses, industrial premises up to 30 sq.m. The heart of the model is stainless steel heating elements with an increased resource and a thermal power of 3 kW. You can connect the device to a single-phase and three-phase electrical network.

The controls are located on the front panel, the design also provides terminals for connecting the circulation pump. The pressure in the heating system is 2.5 bar. The control system is reliable and simple, there is a thermostat and a mechanical power switch. You can set weekly and daily temperature cycles for heating. In addition to water, antifreeze and transformer oil can be used in the system.

Specifications:

• WxHxD: 230x550x170 mm;
• weight: 8 kg;
• warranty: 1 year;
• nominal supply voltage 220 V;
• power switch: 1/2/3 kW.

2. ERDO EVPM-NEXT-3 P

A nice-looking and quite worthy boiler in terms of characteristics, to which buyers have few complaints. The maximum system pressure is 3.0 bar. The efficiency is high - 99.0%.

Type - single-circuit, the model should be hung on the wall (special fasteners are provided for this. It is sold in a white case. The manufacturer is PKF ELVIN. There is one power level. To maintain this model, master skills are not needed: any user will understand the instructions and the subsequent installation.

Specifications:

• warranty: 12 months;
• HxWxD: 520x270x140;
• weight: 9.00 kg.

3. Alvin EVP 3-EU

Alvin EVP 3-EU is a real "smart" boiler. No, he will not talk to you, but he will cope with his work without any complaints. And the whole point is in the intelligent power distribution system, which performs the tasks assigned to it flawlessly.

The control unit is electronic, the power is determined automatically, the phase load is also determined at the intellectual level (here the patented development of Alvin is used).Type of heating element SEV-3 - stainless steel "Flange Alvin".

There is a soundtrack: for example, in case of a malfunction, the device will make a loud sound, it will also beep you every time you press a key. The power key Triac VTA-16 is used. The supply of "return" during installation is carried out both on the left and on the right. Installed on the floor, connected to a single-phase network.

Specifications:

• dimensions: 290x540x140 mm;
• weight: 9 kg;
• maximum coolant temperature: 89 °С.

4. Teplotech EVP-4.5

What can be used for heating residential buildings and industrial buildings? Boiler Teplotech EVP-4.5! This single-phase modification will give you comfort and coziness at any time, but in a limited area - up to 41 square meters. Convenient in size, with a well-assembled electronic circuit, heats well, keeps the temperature evenly.

The control is carried out through three automatic switches: they allow you to adjust the power of the electric boiler in proportion to 1/3, 2/3 and 100% of the power. For mounting to the wall there are a pair of "ears" at the top and bottom. There are three automata on the panel: the first one starts the first heating element and the pump, the rest - the subsequent heating elements. Relays in the process click, but slightly.

The temperature regulator is convenient, the terminals sit firmly, nothing dangles. There is a block for connecting an external temperature sensor and a circulation pump. The connection is simple, there is a diagram with a boiler. The coolant heats up quickly (five minutes is enough), two circuits are only 25 liters of water.

Specifications:

• WxHxD: 140x540x290 mm;
• weight: 8.2 kg;
• circuit pressure: 1.5 bar;
• rated current of the circuit breaker 1f: 25 A.

The best electric boilers for 380 V

1. STOUT SEB-0001-000012

The model was developed in close cooperation with leading Russian engineers and specialists and is distinguished by a high level of reliability and a considerable number of advantages. Stainless blocks of heating elements will serve faithfully for several years. Also in the system there is a safety valve of European quality, an expansion tank and a circulation pump.

In case of a dangerous excess of temperature, an emergency shutdown is triggered, and the system also gives a signal when the pressure rises or falls. Due to a special communication unit, the device works even on one phase. Resources of heating elements are spent evenly. The panel has a wide two-color display, which displays all the important information.

Power steps: 2/4/6/8/10/12. By setting the mode once, you do not have to adjust it daily. The interface is intuitive and the operation is simple. Operating modes 6 pieces.

Specifications:

• voltage: 380 V;
• width: 470 mm
• height: 340 mm;
• length: 860 mm;
• weight: 42 kg.

2. Protherm Skat RAY 14 KE /14

The Slovak company Protherm has been selling equipment in Russia for over fifteen years and has earned a lot of positive feedback. Protherm Skat RAY 14 KE /14 is a wall-mounted model with a built-in circulation pump and a tank, ideal for heating apartments, private households and other objects that are cut off from the gas main. Due to the stylish appearance, the model fits into almost any interior without spoiling the overall impression.

Heating elements are protected from corrosion, the device requires connection to a three-phase power supply. Due to the power of 14 kW, it is possible to heat an area of ​​140 sq.m. It is allowed to connect an indirect heating boiler. The circulation pump does not make noise, the volume of the expansion tank is 7 liters.

There are sensors for overheating of the coolant, as well as a protection system against the so-called "dry" run. The system independently carries out diagnostics of the internal state, and the fault codes of internal errors are displayed on the liquid crystal display. The control panel is push-button, electricity is consumed within reasonable limits.

Specifications:

• protocol: e-BUS;
• mains voltage: 380 V;
• dimensions (HxWxD): 740x410x315;
• net weight: 25.00 kg;
• gross weight: 30.00 kg.

3. Resource-ElectroTherm EVPM-15

Domestic apparatus of the EVPM series at an attractive price for operation in a small room By purchasing it, you will receive a reliable apparatus for heating an apartment, house or work space.The design is simple: several tubular heaters in a flask through which the coolant flows. Also in the case there is a temperature-sensitive tube of the temperature controller, modules of the heating system and the simplest automation.

The manufacturer provides a warranty for all models of electric boilers for a period of 12 months. The boiler has been working without problems for several years. It can be used in open and closed heating systems with a pressure of 1, 2 and even 3 atm. Heated area - 150 sq.m. Mains voltage is three-phase. There is an indication of inclusion. The use of antifreeze is allowed. The warranty lasts for a year.

Specifications:

• WxHxD: 230x650x170 mm;
• weight: 12 kg;
• power steps: 3;
• coolant temperature: 35 - 85 °C.

The best electric boilers up to 6 kW

1. EVAN Warmos Start - 5

Minimum energy consumption, ease of installation and configuration, ergonomics - these qualities will please any buyer. If you need a budget-friendly but solid boiler for heating a private house or warehouse, the Warmos Start-5 model will come in handy. It is used both as the main source of heating, and as an additional one.

Suitable fuel is gas or solid fuel. The dimensions are small, so you can easily allocate space to it in the room. Unlike similar boilers, it does not make noise during operation. The heating element is made of stainless steel, three-stage control - at 3.33, 2.33 and 5 kW.The temperature of the coolant can be adjusted (within 30-85 °C). Connects to both three-phase and single-phase networks.

An emergency self-resetting sensor helps to protect the machine from overheating: the system automatically shuts down when the temperature is too high. Both water and non-freezing liquids can be used as a heat carrier. By installing a hydraulic arrow or a three-way mixing valve, you can connect the device to a “warm floor”.

Specifications:

• width: 205.00 mm;
• depth: 115.00 mm;
• weight (net): 6.85 kg;
• manufacturer's warranty: 1 year.

2. Resource-ElectroTherm EVPM-4.5

Another model of an electric boiler with a steel body and a good "stuffing" inside it. What's inside? Nothing special at first glance - a tank with tubular electric heaters - but all this is modern, made of quality materials and able to last much longer than the warranty period. Electricity consumption per hour is small - 4.5 kW / h. A three-phase mains voltage is required (single-phase, alas, will not work).

Power levels, like many, three. Simple, but high-quality alloys and materials, simple design - all this makes the Resurs-ElectroTerm EVPM-4.5 model quite attractive for middle-class buyers. Heated area - up to 45.0 square meters. Production - Russia, a guarantee is given for 12 months.

Specifications:

• dimensions: 170x230x550;
• weight: 8 kg;
• rated power: 4.5 kW.

3. Protherm Skat RAY 6 KE /14

Boilers from the Protherm brand have long established themselves as a reliable solution for heating an apartment and a country house (produced since 1992). Intelligent connection of heating elements and intuitive operation guarantee you reliable operation and long service life. High efficiency - throughout the entire period of operation.

It does not require special skills for installation and maintenance. The display is liquid crystal. Highest safety (due to pump protection, frost protection and thermal fuse). It is allowed to prepare hot water in an additional storage boiler (not included in the boiler delivery set and you will have to buy it separately). The expansion tank has a volume of 8 liters.

Specifications:

• branch pipe for connecting the circuit: 3/4?;
• WxHxD: 410x740x315 mm;
• weight: 24 kg;
• maximum circuit pressure: 3 bar.

The best energy-saving electric boilers

1. EVAN Next 3

This "standard" class boiler will give you warmth in the country, in a private house, and will also help to keep the goods in the warehouse.Ergonomic, economical and easy to install, the boiler can be used both as a single copy and as an insuring source of heating (if the first device runs on solid fuel or gas).

The design itself is simple: it is a monoblock with a control panel and a boiler. The built-in thermostat helps to reach the desired temperature. Three-level management. To ensure safety, the manufacturer has provided a function to automatically turn off the boiler if it heats up more than is permissible. As soon as the temperature of the coolant drops, the system will turn on again. Can be connected to the "warm floor". Installation is carried out quickly. Heat carrier temperature - 30 - 85 °С. The GSM module can be connected to Evan Next boilers manufactured after November 2018.

Specifications:

• WxHxD: 205x600x105 mm;
• power steps: 3 pieces;
• weight: 8 kg.

2. ZOTA Solo 3

The plant of heating equipment and automation ZOTA can be proud of the Solo 3 energy-saving boiler: reliable and powerful. This model has a circulation pump, a three-stage power adjustment and an installed boiler safety group. The GSM module can be connected optionally.

When turned on, a miniature indicator lights up on the panel. The heating element, as in all premium boilers of the Zota group, is made of low-temperature stainless steel. The model is suitable for a residential building, and for a bathhouse, and for a country house up to 30 square meters.The device is connected to a single-phase network from 3 to 9 kW. The flask with a heating element is hidden under a durable casing, there is also a control unit, a circulation pump and a safety group. The rated current of the 3F circuit breaker is 16 A.

Specifications:

• dimensions: 330x673x226 mm;
• weight: 19.5 kg;
• connection pipe: 3/4?.

3. UralProm EVPM-3 kW

UralProm brilliantly fulfills its task: it produces high-quality and affordable power, compressor and pumping equipment. Model EVPM-3 kW is no exception: it is ideal for heating buildings with both open and closed heating systems. The built-in control panel helps to regulate the temperature indicators “for yourself”, there are also conclusions for the room thermostat and pump.

Recommended room area (sq.m) - 30 sq.m. m. Passport-instruction detailed and clear. The device is attached to the wall. The boiler can be used separately, but if desired, in conjunction with models that run on solid and gaseous fuels.

Characteristics are pleasing: 3 power levels, outlet water temperature from 35 to 85 degrees. The thread diameter of the inlet and outlet pipe is 1 inch. Both water and antifreeze for heating systems are suitable as a heat carrier.

Specifications:

• item width: 28 cm;
• power consumption: 220 W;
• thermal power: 3 kW.
• weight: 8 kg;
• warranty: 1 year.

The best inexpensive electric boilers

1. Electromash EVPM-6

Stylish and inexpensive electric boiler: its sides are rounded, due to which the boiler does not look bulky and out of place even in a small room. Boiler connection on the side: right or left. You remove the cover and unscrew a couple of bolts from behind, turn the pipe to the right or left. The exit is at the top.

Makes a loud clicking sound when turned on and off. The power of 6 kW is enough to heat a room of 60 sq.m. The boiler is hung on the wall. The main advantage of the model: reliable automatic switches and the ability to switch power to 100%, 66% or 33% of the total boiler power.

The system includes 3 heating elements of the SEV-6 type. Installation is carried out both vertically and horizontally. The model is made in accordance with GOST 15150-69, which means the humidity limit: no more than 80% in the room. You can connect the device both separately and together with a solid fuel analogue. Permissible networks: 220 V and 380 V. The casing is polymeric. The device is mounted quickly and easily, there is no need to invite a master.

Specifications:

• dimensions: 240x540x140 mm;
• weight: 9 kg;
• thermal power: 2 - 6 kW;
• coolant temperature: 30 - 90 °C.

2. Pyramid EVN-6

The domestic electric boiler EVN-6 will help you cope with the heating of a room with a footage of 50-70 square meters. The heating element is hidden inside a durable housing, and the heating system can be controlled through the keys on the front panel of the electric boiler. But, in addition to the keys, it is possible to carry out manipulations with the connected thermostat. If the liquid inside reaches the maximum permitted value, the automation turns off the system, and turns it on only when the boiler is turned on again.

The minimum setting temperature is 85 degrees. The boiler works both autonomously and in tandem with a solid fuel boiler. The device is universal in terms of installation: it can be hung on the wall with the help of special fasteners, and it can also be placed on the floor. There are no problems with the connection either: connection is allowed both on the left and on the right. It is possible to change the location of the lower branch pipe relative to the control panel. The coolant is ordinary tap water. Sealed welded construction and powder-coated housing guarantee the owner no corrosion.

Specifications:

• L? W? H: 235? 155? 520 mm;
• weight: 8 kg;
• pressure, kg/cm2: 3.0;
• nozzles: G1;
• type of heater: TENB-6.

3. Galan OCHAG-3

One of the cheapest flow type electric electrode heating boilers from the Russian manufacturer of heating equipment Galan. The heating process in it occurs due to the ionization of the coolant.This model can be used in a closed heating system without the selection of boiling water from the system for industrial, domestic and other purposes.

The circulation of the coolant occurs both naturally and by forced means. In the event that a coolant leak occurs, the control system will shut itself off. The efficiency of electrode boilers reaches 98%. The ionization chamber is small, which is why the coolant heats up quickly.

As a heat carrier, water prepared in a special way or a special liquid based on ethylene glycol is used. Heated area - 50 sq.m. this model can be equipped with automation: the system will allow the consumer not only to set the desired temperature of the radiators and the air temperature in the room, but also automatically maintain it around the clock, turning the electric water heater on and off. The product is certified.

Specifications:

• WxHxD: 110x320x80 mm;
• weight: 1.55 kg;
• water volume: 40 l;
• mains voltage: 220V.

Which firm to choose?

The Russian brand STOUT has established itself on the market not so long ago, but firmly. The products are developed together with European partners, their advantages are versatility, environmental friendliness, product reliability, marketing and technical support.

EVAN - products of this brand are sold in all regions of Russia and combine modern technologies and innovative equipment developments.

Kospel products stand out for their exquisite design, energy efficiency, functionality and the possibility of using renewable energy sources.

Useful video

With the choice of model will help tips in the video below: