TOP 15 best aluminum radiators: rating 2024-2025 and which ones to choose for heating an apartment and a private house

Aluminum heating radiators are a good alternative to outdated cast iron radiators.

They are light, inexpensive and attractive in appearance.

In addition, aluminum has an increased heat dissipation, so radiators made of this metal contribute to the rapid heating of the room.

Rating TOP-15 best aluminum radiators 2024-2025

Place	Name	Price
TOP 5 best aluminum radiators for a private house in price / quality ratio
1	Royal Thermo Revolution 500	Ask for a price
2	ROMMER Profi AL 350	Ask for a price
3	Oasis AI 500/96	Ask for a price
4	Royal Thermo Revolution 500x8	Ask for a price
5	Royal Thermo Indigo 500	Ask for a price
TOP 5 best aluminum radiators with side connection
1	ROMMER AI Plus 200	Ask for a price
2	Royal Thermo Revolution 350	Ask for a price
3	Royal Thermo DreamLiner 500	Ask for a price
4	Rifar Alum 500	Ask for a price
5	Global VOX R 500	Ask for a price
TOP 5 best aluminum radiators with bottom connection
1	Rifar Alum Ventil 500	Ask for a price
2	Rifar Alum Ventil 350	Ask for a price
3	Rifar Alum Ventil 500 x 5	Ask for a price
4	Rifar Alum Ventil 350 x 13	Ask for a price
5	Rifar Alum Ventil 350 x 11	Ask for a price

How to choose and what to look for?

Many companies are engaged in the production of aluminum heaters, but when choosing a device, you should pay attention not to the brand, but to the technical characteristics of the product.

The following recommendations will help you choose a high-quality aluminum battery:

1. By design, it is better to give preference to a cast radiator. It withstands pressure drops in the system much better and can work in any conditions.
2. Attention should also be paid to the internal coating of the product.. Reliable manufacturers treat the inside of the radiator with a special compound that forms an oxide film on the surface and protects the device from corrosion.
3. It is advisable to buy a radiator assembled and with the right number of sections - since factory twisting is usually more reliable than done on your own.
4. It is better to give preference to European manufacturers. Their devices are of high quality, and toxic compounds are not used for production. There are no such guarantees in Chinese devices.

It is also advisable to purchase the device in a specialized heating equipment store, and not in the market..

So the buyer will be protected from buying a fake.

The best aluminum radiators for a private house in terms of price / quality

Aluminum radiators can be installed both in high-rise buildings and in private houses.For individual heating systems, you can choose a high-quality, and relatively inexpensive device.

Royal Thermo Revolution 500

Sectional aluminum radiator designed for wall mounting. Connection to the heating system is lateral, there are no difficulties with the installation of the device.

The radiator is made of cast aluminum, therefore it is able to withstand water hammer and pressure surges up to 30 bar.

Depending on the model, the device may consist of 1-22 sections, but it is better to immediately buy an assembled radiator, focusing on the area of ​​\u200b\u200bthe room.

The installation kit is not provided with the heater, so all additional elements required for installation will have to be purchased separately.

Specifications:

• heat dissipation 181-3982 W;
• operating temperature 110 degrees;
• maximum working pressure 20 bar;
• weight 1.2-26.4 kg;
• section dimensions (W/H/T) 80x570x80 mm.

ROMMER Profi AL 350

Outwardly simple, but functional aluminum radiator, which is suitable for systems individual heating.

The device is compact and has a laconic design, so it will harmoniously fit into any interior.

The sectional design of the radiator allows you to select a model according to the area of ​​\u200b\u200bthe room.

The product is completely made of aluminum, and high-quality internal coating and external painting prevent rust and leakage.

The maximum working pressure is 16 bar, but the device is able to withstand pressure surges up to 24 bar.

The connection is lateral, but the mounting kit is not provided with the radiator, so the necessary parts for installing the radiator will have to be purchased separately.

Specifications:

• power 135-2700 W;
• operating temperature 110 degrees;
• number of sections 1-20;
• weight 0.8-16 kg;
• section dimensions (W/H/T) 80x428x80 mm.

Oasis AI 500/96

Lightweight and functional radiator designed for installation in private homes or apartments with individual heating system.

The body is made of aluminum, and high-quality painting and a special internal coating prevent the formation of rust.

The operating pressure of the battery is 16 bar, but, due to the well-thought-out design and high-quality materials, the heater successfully withstands pressure surges up to 24 bar without loss of performance.

Users positively evaluate the high heat dissipation of the device.

Additionally, a rotary regulator is provided on the body, which allows you to adjust the temperature in the room with one movement.

Specifications:

• operating temperature 110 degrees;
• number of sections 4-12;
• power 532-1596 W;
• weight 3.4-10.2 kg;
• section dimensions 75x560x96 mm.

Royal Thermo Revolution 500x8

High-quality aluminum radiator with a standard number of sections perfectly suitable for heating medium-sized residential premises.

The body is made using high quality aluminum casting technology. A special internal coating prevents rust formation, and a thick layer of paint on the outside of the device provides long-term operation and protection against leaks.

The radiator can be installed both in private houses with individual heating, and in high-rise buildings with connection to the central heating system.

The design of the device is able to withstand a working pressure of 20 bar and sudden pressure surges within 30 bar.

Specifications:

• power 1368 W;
• number of sections 8;
• operating temperature 110 degrees;
• weight 9.6 kg;
• section dimensions (W/H/T) 80x570x80 mm.

Royal Thermo Indigo 500

The radiator of a well-known European brand is of high quality and thoughtful design.

The device belongs to the sectional type, so the number of elements can be increased individually, focusing on the area of ​​\u200b\u200bthe room.

The aluminum case is reliably protected from rust, thanks to a special internal coating and high-quality painting on the outside..

The device is recommended to be installed in private houses with an individual heating system.

But the radiator is able to withstand an operating pressure of 20 bar and surges up to 30 bar, so it can also be installed in apartment buildings with a centralized heating system.

Specifications:

• heat dissipation 195-2730 W;
• operating temperature 110 degrees;
• number of sections 1-14;
• weight 1.35-18.9 kg;
• section dimensions (W/H/T) 80x585x100 mm.

The best aluminum radiators with side connection

Lateral radiator connection is standard for many apartments and houses, so many models have just such a design. The choice of heaters with side connection is rich, but there are models that stand out from the rest.

ROMMER AI Plus 200

This model of aluminum radiator is suitable for those who value quality, compactness and functionality.

The device is designed for wall mounting and side connection to the heating system.

But the design features suggest the use of a radiator only with individual, and not centralized heating systems.

The operating pressure of the device is 14 bar, but a short-term increase in this indicator to 21 bar is allowed..

The number of sections can be selected individually, depending on the area of ​​\u200b\u200bthe room, but it is better to immediately buy a finished device with a certain number of sections, since the factory connection is more reliable than manual.

Specifications:

• operating temperature 110 degrees;
• power 120-2400 W;
• number of sections 1-20;
• weight 0.6-13.4 kg;
• section dimensions (W/H/T) 80x276x96 mm.

Royal Thermo Revolution 350

The radiator of the well-known European brand is characterized by a discreet design and thoughtful construction.

In combination with affordable cost and functionality, this makes the device one of the best for installation in private houses and apartments in multi-storey buildings.

The body of the device is made of high-quality aluminum, and a special internal coating protects the device from corrosion..

Outside, the radiator is painted with heat-resistant paint, which does not turn yellow and does not crack under the influence of high temperatures.

On the side of the case is a convenient rotary knob that allows you to adjust the temperature in the room.

Specifications:

• heat dissipation 141-1974 W;
• operating pressure 20 bar;
• operating temperature 110 degrees;
• weight 1-14.1 kg;
• dimensions (W/H/T) 80x420x80 mm.

Royal Thermo DreamLiner 500

Stylish aluminum radiator features an original design and excellent operational characteristics.

The device is designed for lateral connection, so there are no problems with installing a radiator. But keep in mind that the mounting kit is not included, so the brackets and other necessary accessories will have to be purchased separately.

The design of the heater allows it to be connected to individual and centralized heating systems.

The working pressure is 20 bar, but the high build quality provides reliable protection of the device against water hammer and pressure surges within 30 bar.

Specifications:

• heat dissipation 113-1592 W;
• operating temperature 110 degrees;
• number of sections 1-14;
• weight 1.3-18.3 kg;
• section dimensions (W/H/T) 80x580x87 mm.

Rifar Alum 500

Easy to operate and reliable aluminum radiator of domestic production specially adapted for installation in multi-storey buildings.

The durable aluminum case is painted with heat-resistant paint on the outside, and treated with a special anti-corrosion compound on the inside.

In combination with a robust design, this allows the device to withstand an operating pressure of 20 bar, as well as water hammer and short-term pressure increases up to 30 bar..

The light body and compact dimensions make it easy to transport and install the device.

But keep in mind that the mounting kit is not included, so brackets and other accessories will have to be purchased separately.

Specifications:

• heat dissipation 183-2928 W;
• operating temperature 135 degrees;
• number of sections 1-16;
• weight 1.4-23.2 kg;
• section dimensions (W/H/T) 80x565x90 mm.

Global VOX R 500

Sectional aluminum radiator designed for wall mounting and side connections.

The design of the heater is ascetic and discreet, so the device will harmoniously fit into any interior.

The body is made of high-quality aluminum, and the inside is coated with a special composition that prevents corrosion.

The heater is more suitable for private houses or apartments with individual heating, as the operating pressure of 16 bar is not enough to connect to the central heating system.

At the same time, the device is able to withstand water hammer and short-term pressure surges up to 24 bar.

Outside, the case is painted with heat-resistant paint, and equipped with a convenient rotary knob that allows you to adjust the temperature in the room.

Specifications:

• heat dissipation 127-2540 W;
• operating temperature 110 degrees;
• number of sections 1-20;
• weight 1.4-29 kg;
• section dimensions (W/H/T) 80x590x95 mm.

The best aluminum radiators with bottom connection

Not all houses have a lower radiator connection, but the choice of heaters with this function is quite wide. Most users prefer domestic devices.

Rifar Alum Ventil 500

Compact, inexpensive, but reliable aluminum heatsink adapted to use with domestic heating systems.

Since the body is completely made of aluminum, the weight of the radiator is small, which facilitates transportation and installation.

The outer part of the case has a special protective coating against rust.. From above, the device is completely covered with heat-resistant paint, which does not crack or turn yellow even after several years of operation.

The radiator belongs to sectional devices, so the number of sections can be selected individually, focusing on the area of ​​\u200b\u200bthe room.

The operating pressure of the device is 20 bar, so it can be connected to both individual and central heating systems.

Specifications:

• heat dissipation 183-2928 W;
• operating temperature 135 degrees;
• number of sections 1-16;
• weight 1.4-23.2 kg;
• section dimensions (W/H/T) 80x565x90 mm.

Rifar Alum Ventil 350

The domestic radiator is distinguished by ease of operation, reliability and thoughtful construction.

Durable and lightweight aluminum housing is coated with a special anti-corrosion compound, so the failure of the device or leakage is excluded.

In the side of the case there is a regulator with which the user can independently adjust the temperature in the room.

The design of the device is universal, and a convenient bottom connection allows you to mount the radiator even under a low window sill.

High heat output and optimal distribution of hot air ensure long-term temperature retention and rapid heating of the room.

Specifications:

• heat dissipation 153-2448 W;
• operating temperature 135 degrees;
• number of sections 1-16;
• weight 1.2-19.2 kg;
• section dimensions (W/H/T) 80x415x90 mm.

Rifar Alum Ventil 500 x 5

Functional and thoughtful model of an aluminum radiator for 5 sections. high heat dissipation and operating temperature ensure rapid heating of the room, but the limited number of sections allows the device to be installed only in small and medium rooms.

The robust housing made of high-quality aluminum successfully withstands water hammer and pressure surges up to 30 bar.

Inside the case is coated with a special chemical composition that prevents corrosion and guarantees protection against leaks..

Users also appreciate the design of the device, which makes the radiator suitable for installation in residential, office and other areas.

Specifications:

• heat dissipation 915 W;
• operating temperature 135 degrees;
• operating pressure 20 bar;
• weight 7.2 kg;
• dimensions (W/H/T) 80x400x90 mm.

Rifar Alum Ventil 350 x 13

A powerful and functional radiator with which you can heat even large premises.

The product is made of lightweight but durable aluminium. Inside the case is covered with a protective compound that prevents the formation of rust and leakage of the device.

Additionally, a rotary regulator is provided on the case, which allows the user to independently adjust the temperature in the room..

The outer layer of paint is very durable, so it does not crack or turn yellow when exposed to high temperatures.

The working pressure of the device is 20 bar, but the body itself is able to withstand water hammer and pressure surges up to 30 bar.

Specifications:

• heat dissipation 1989 W;
• operating temperature 135 degrees;
• operating pressure 20 bar;
• weight 15.6 kg;
• dimensions (W/H/T) 80x1040x90 mm.

Rifar Alum Ventil 350 x 11

Functional and easy to use aluminum radiator with standard number of sections.

11 elements of the heater are sufficient for heating and maintaining the optimum temperature even in large rooms.

Another advantage of the device is that the mounting kit is provided in the kit, so the user does not have to buy brackets and other fasteners..

The lightweight but durable aluminum housing is rust-resistant and water hammer resistant, so if the pressure in the system rises to 30 bar, the device will not fail.

Specifications:

• heat dissipation 1683 W;
• operating temperature 135 degrees;
• operating pressure 20 bar;
• weight 13.2 kg;
• dimensions (W/H/T) 80x880x90 mm.

Types of aluminum radiators and their brief description

In total there are three types of aluminum radiators.

They differ in manufacturing technology and have some features.:

1. cast. Such batteries are manufactured using injection molding technology. As a rule, an alloy of aluminum and silicon is used for production. Due to this, the products are characterized by increased strength, corrosion resistance and excellent heat transfer.
2. extrusion. Sections of such radiators are extruded on an extruder under pressure, and then they are connected by welding.Some manufacturers use composite adhesive for this purpose in order to save money. In any case, the probability of leakage of such a radiator is much higher than that of a cast one.
3. anodized. This is the most expensive type of radiator. For production, special aluminum of the highest degree of purification with anodic oxidation is used. Due to this, the very structure of the metal changes and its resistance to corrosion increases. However, due to the high cost, this type of aluminum radiators is practically not used in everyday life.

Advantages and disadvantages of aluminum radiators

The increased demand for aluminum radiators is due to their many advantages.

The advantages of such heating devices include:

• Ability to withstand high pressure and water hammer. On average, an aluminum radiator is rated at 20 bar, but most models can withstand short-term pressure surges of up to 30 bar. Due to this, such batteries are suitable for installation in apartment buildings.
• The high level of heat transfer of aluminum contributes to the rapid and uniform heating of the room. In addition, a special regulator is installed on the radiators themselves, which allows you to adjust the temperature.
• The light weight of aluminum batteries facilitates their transportation and installation.. Also, these products have a stylish design, and harmoniously fit into any interior.
• Aluminum radiators are presented in a huge range of sizes. This allows you to choose a model that is suitable in size and number of sections.

But we must not forget about the cons.

In addition, aluminum is easily corroded.. And, if the manufacturer has saved on the internal processing of the radiator, it is unlikely that it will be possible to avoid leaks.

Which firm to choose?

Many companies are engaged in the production of aluminum radiators, but the leaders are traditionally considered:

1. Italy. Well-known companies Sira, Ferroli and Global produce stylish products with a high-quality heat-resistant coating that reliably protects devices from corrosion. The radiators of these brands withstand pressure drops well, but are very expensive.
2. Russia. The Rifar company is considered the leader among domestic manufacturers of radiators. Some brand models in design and technical characteristics copy Global products. Such radiators are cheaper than Italian ones, but they are much better adapted for connection to domestic heating systems.
3. China. The most famous Chinese manufacturers of aluminum radiators are Bilux and Konner. Such products are inexpensive and of high quality, but in order not to buy defective or fake goods, you need to buy a radiator only in a specialized store, having previously studied its technical data sheet.

Steel, copper or aluminum - what to choose?

It is difficult to unambiguously answer the question of which radiator is better, since each device made of a certain metal has its own characteristics, pros and cons.

An objective assessment of radiators made of a certain type of metal will help you make the right choice.:

• Steel devices are more suitable for individual than for centralized heating systems. Such radiators are cheaper than aluminum ones, they are distinguished by good heat dissipation and corrosion resistance. But steel is considered to be a relatively brittle metal and is not capable of withstanding water hammer with an increase in pressure to a level of more than 25 bar.
• Copper radiators have excellent performance characteristics. Copper has a high thermal conductivity, so this battery will warm up the room 2 times faster than aluminum. In addition, the device is resistant to corrosion and water hammer, but the cost of copper radiators is very high, so many users bypass them.
• Aluminum devices have all the necessary characteristics for long-term operation. But in order for the battery to warm up the room well and not leak, you need to buy products from trusted manufacturers.

Aluminum or bimetallic - which one to choose?

There are also bimetallic radiators on the market. They cost more than aluminum, but are considered the most modern type of heating device.

In bimetallic radiators, the body is made of aluminum, and the inside is made of stainless steel.

Due to this, the device is characterized by increased resistance to corrosion and provides rapid heating of the room.

If the budget allows, it is better to buy a bimetallic radiator, and if finances are limited, you can install aluminum, but it must be of very high quality.

Customer Reviews

Useful video

From the video you will learn how to choose an aluminum heating radiator: