TOP 15 best gypsum plasters for interior work: 2024-2025 rating for price / quality and which one is suitable for walls / ceiling

Gypsum plasters are considered a good option for quick and high-quality leveling of walls and ceilings.

They are light and plastic, have excellent durability and do not crack if the application technology is followed.

We have collected the most popular and best samples of gypsum plaster for 2024-2025 and tried to take into account their features and disadvantages so that you can easily choose the right material for finishing work.

TOP-15 rating of the best gypsum plaster for interior work in 2024-2025

Place	Name	Price
TOP 3 best gypsum plaster for interior work by price / quality for 2024-2025
1	Knauf Rotband	Ask for a price
2	Volma Layer	Ask for a price
3	Weber Vetonit Profi Gyps	Ask for a price
TOP 3 of the best gypsum plaster for interior work for machine application
1	Volma Gips-Active	Ask for a price
2	Knauf MP-75	Ask for a price
3	Prospectors Optimum	Ask for a price
TOP-3 of the best heat-insulating gypsum plaster for interior work
1	Rousean Termoplast	Ask for a price
2	Unis Teplon Reinforced	Ask for a price
3	Perfecta Hypstar	Ask for a price
TOP 3 of the best leveling gypsum plaster for interior work
1	Volma Canvas	Ask for a price
2	Prospectors Gypsum	Ask for a price
3	Rousean Plaster	Ask for a price
TOP-3 of the best gypsum plaster for interior work in small packaging 5-10 kg
1	Knauf Rotband, 10 kg	Ask for a price
2	Unis Teplon, 5 kg	Ask for a price
3	Bergauf Bau Putz Gips, 5 kg	Ask for a price

How to choose gypsum plaster for interior work in terms of price / quality?

When buying this material for finishing work, it is recommended to pay attention to the main selection parameters:

1. Solution expiration date. If you take plaster for specialists - 20-30 minutes. But for a beginner, it takes more time to work, so when working with the material on your own, it is better to take a sample with a large time interval.
2. Read the packaging for information on which base the solution can be applied to and what can be used as a further coating.
3. If the walls are very uneven, choose samples with the ability to apply a thick layer.
4. For a bathroom or kitchen, you need to choose moisture-retaining plaster, the usual one will simply fall off due to the negative impact.
5. Application method. There are samples only for manual application, there are for the machine method and universal ones.

TOP 3 best gypsum plaster for interior work by price / quality for 2024-2025

Knauf Rotband

If you ask any decorator to name a few of the best plasters, then the list you will definitely hear this pattern.

A high-quality gypsum-based mixture is used to level interior walls and ceilings in both living rooms and in the bathroom or kitchen. The main feature of this plaster is the ability to apply a layer over any base, including concrete or brick.

Special polymer fillers have increased adhesion and made the application process easier.

The sample has many certificates of conformity, experts consider this plaster to be one of the best in terms of fire resistance (and, consequently, fire safety), environmental friendliness and vapor permeability.

Yes, the price is slightly higher than that of competitors, but the quality is beyond doubt and guarantees ease and safety of finishing.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-50.
4. The consumption of the mixture according to the manufacturer is 8.5 per sq.m. (layer 10 mm).
5. Water consumption per 1 kg of the mixture is 0.6 liters.
6. The pot life of the solution is 25 minutes.

Volma Layer

Domestic dry mix based on gypsum, which contains a light aggregate, modifying additives and mineral fillers, thanks to which it was possible to achieve optimal working time, high adhesion and good water-holding capacity.

It is recommended to use for leveling walls and ceilings in rooms with normal humidity, the permissible layer thickness is determined by the framework from 5 to 30 mm, but in some places it can reach 60 mm.

With proper mixing and application, the plaster, after drying, gives a glossy surface, on top of which additional puttying is no longer required.

The mixture is exclusively for manual application. The solution does not change its texture within 20 minutes. It can be applied without priming, but in this case the base must be wetted with water.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-30.
4. The consumption of the mixture according to the manufacturer is 8-9 kg per sq.m. (layer 10 m).
5. Water consumption per 1 kg of the mixture - 650 ml.
6. The pot life of the solution is 20 minutes.

Weber Vetonit Profi Gyps

Gypsum-based plastic plaster, which includes microfiber, providing good viscosity and consistency.

The solution dries quickly and evenly, without cracking and shedding. Finely ground gypsum is easier to apply and level; with a layer of 10 mm, from 8.5 to 10 kg per square meter is consumed.

Due to the increased adhesion, peeling does not occur even in those places where a thick layer is used.

Can be applied to any surface, including concrete, brick, gypsum sheets. This is a plaster of domestic production, packaged in paper bags of 30 kg. It masks defects well and is suitable for painting, wallpaper or under tiles, but only in rooms with normal air humidity.

It takes up to 5 days for complete solidification, the period may and will decrease with uniform ventilation of the working room.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-50.
4. The consumption of the mixture according to the manufacturer is 8.5 - 10 kg per sq.m with a layer of 10 mm.
5. Water consumption per 1 kg of the mixture - 550 ml.
6. The pot life of the solution is 40 minutes.

TOP 3 of the best gypsum plaster for interior work for machine application

Volma Gips-Active

A solution that, when properly mixed, remains suitable for one and a half hours, can be applied to walls and ceilings both manually and by machine.

The permissible layer thickness is from 5 to 30 mm, but in some areas it is allowed to increase the thickness to 50-60 mm.

This plaster is always applied over a primer, which will protect the mortar from cracking, provide a perfectly even smoothing and provide a high degree of resistance.

The plaster has good plasticity indicators, so even a beginner can work with this sample, especially since the consistency after kneading retains its main properties for up to 1.5 hours.

Suitable only for rooms with normal humidity, in the bathroom or in the kitchen they are not able to serve for a long time.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-30.
4. The consumption of the mixture according to the manufacturer is 8 - 9 kg per square meter. m. with a layer of 10 mm.
5. Water consumption per 1 kg of the mixture - 650 ml.
6. The pot life of the solution is 90 minutes.

Knauf MP-75

A dry mix based on fine-grained gypsum, which was intended to be applied to internal walls by machine.

If we compare this sample with the plaster from the Rotband company, then there is an undeniable advantage here - the use of defoamers, plistifiers, thanks to which the mortar stretches better and hardening retarders.

Therefore, this product is considered an excellent option not only for a professional master, but also for a beginner.

The solution can also be applied manually, after kneading it does not thicken for two hours. Quickly and easily smoothes, well fills irregularities and cracks.

At the same time, it remains even and smooth, without bubbles and other surface damage.

The mixture is suitable for horizontal and vertical bases, and with additional protection it can be used in the bathroom or in the kitchen, that is, where humidity is usually high.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 8-50.
4. The consumption of the mixture according to the manufacturer is 8 - 9 kg per square meter. m. with a layer of 10 mm.
5. Water consumption per 1 kg of the mixture - 650 ml.
6. The pot life of the solution is 120 minutes.

Prospectors Optimum

Gypsum plaster from a domestic brand, produced in paper bags of 30 kg and designed for processing interior walls and ceilings in dry rooms with normal humidity levels.

The layer thickness can vary from 6 to 60 mm, the mixture has good plasticity and excellent stretch, allowing you to quickly and evenly distribute it over the surface. Solution after preparation is suitable for work within 90 minutes.

The plaster can be applied both manually and by machine, which indicates its versatility and good technical characteristics.

After drying, the shade is uniform, without bubbles and cracks, the coating does not peel off and is in good contact with paint, wallpaper and tiles.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 6-60.
4. The consumption of the mixture according to the manufacturer is 10 - 11 kg per square meter. m.
5. Water consumption per 1 kg of the mixture - 400 ml.
6. The pot life of the solution is 90 minutes.

TOP-3 of the best heat-insulating gypsum plaster for interior work

Rousean Termoplast

White thermally insulating gypsum plaster that can be applied to any foundations with different porosity.

Perfectly eliminates irregularities, after drying it has a uniform color and does not require additional puttying. With a layer of 10 mm, from 8 to 9 kg per square meter is consumed, the permissible layer thickness starts at 5 and ends at 50 mm.

The solution after preparation can be used from 20 to 30 minutes, re-dilution with water is excluded, as this will reduce the durability and convenience of the material.

Due to their thermal insulating properties, they can replace special mineral wool and provide an optimal indoor climate, protecting it from drafts and temperature changes.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-50.
4. The consumption of the mixture according to the manufacturer is 8 - 9 kg per square meter. m. with a thickness of 10 mm.
5. Water consumption per 1 kg of the mixture - 550 ml.
6. The pot life of the solution is 30 minutes.

Unis Teplon Reinforced

Many masters of finishing works prefer to work with this plaster, because as it is plastic, stretches well and is easy to apply.

It has virtually no shrinkage, due to which the risk of cracking is reduced to a minimum. Thanks to the use of perlite, the manufacturer managed to reduce the specific gravity, so the surface of the ceiling can be safely treated with this solution, the layer will not overload the base.

Perlite also affects the additional heat-insulating properties, so this sample is often used in rooms where it is not possible to use specialized mineral wool for room insulation.

It is allowed to lay this plaster in rooms with high humidity, but only if tiles are planned to be laid on top.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-50.
4. The consumption of the mixture according to the manufacturer is 4.5 - 5 kg per square meter. m. with a layer thickness of 5 mm.
5. Water consumption per 1 kg of the mixture - 500 ml.
6. The pot life of the solution is 120 minutes.

Perfecta Hypstar

Popular and high-quality gypsum plaster for leveling walls and ceilings in residential rooms with normal humidity.

Sold in paper bags weighing 30 kg, the finish gives a white and smooth surface.

The mortar after kneading can be used within two hours, so this pattern is loved by both professionals and beginners in finishing work.

On top of the plaster, you can stick wallpaper, apply several layers of paint or lay tiles. The mixture is applied manually, it is not suitable for the machine method.

It has decent thermal insulation properties, high ductility and adhesion, and some users also point to good soundproofing abilities.

The permissible layer thickness is from 5 to 60 mm, with a layer of 10 mm per square meter, up to 9 kg of the mixture will go.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-60.
4. The consumption of the mixture according to the manufacturer is 9 kg per sq. m. with a layer of 10 mm.
5. Water consumption per 1 kg of the mixture - 550 ml.
6. The pot life of the solution is 120 minutes.

TOP 3 of the best leveling gypsum plaster for interior work

Volma Canvas

Due to excellent technical parameters and a good price-quality ratio, this domestic plaster is popular among finishers.

The gypsum base is complemented by unique chemical and mineral additives, thanks to which the mixture has such qualities as fast drying, moisture retention and excellent adhesion.

The mixture is suitable for leveling the surface of walls and ceilings with their further painting, under tiles or wallpaper.

The dry mixture is diluted with water at the rate of 650 ml per 1 kg and well, evenly mixed.

Homogeneity is maintained for about 20 minutes, the solution is very plastic and easy to work with.

True, some buyers point out that after drying and the plaster layer, some color heterogeneity is noted, this should be taken into account when choosing a paint.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is rough.
3. Layer thickness, mm - 5-30.
4. The consumption of the mixture according to the manufacturer is 9-10 kg per sq. m. with a layer of 10 mm.
5. Water consumption per 1 kg of the mixture - 650 ml.
6. The pot life of the solution is 20 minutes.

Prospectors Gypsum

Domestic version of gypsum plaster for leveling the inner surface walls, which, due to the use of a special filler, is characterized by reduced consumption - from 8 to 9 kg per square meter.

The mixture is perfectly retained on mineral substrates (foam and aerated concrete), as it has good adhesion. True, the water resistance of the sample is low, so it is recommended to use it only in dry rooms with good ventilation.

This plaster is not recommended for novice or amateur work, since the pot life of the solution is estimated at only twenty minutes.

Re-dilution with water can lead to a decrease in ductility and tenacity. The minimum layer should reach 5 mm, and the limit will be a thickness of 50 mm (but locally the layer can be compacted). An excellent option for finishing a smooth surface for painting or wallpaper.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-50.
4. The consumption of the mixture according to the manufacturer is about 9 kg / m2 with a layer of 10 mm.
5. Water consumption per 1 kg of the mixture - 550 ml.
6. The pot life of the solution is 45 minutes.

Rousean Plaster

Gypsum plaster of domestic production for manual application and distribution over the entire treated surface.

After drying, it has a uniform white tint, which allows you to start painting the walls without the need for puttying for other samples.

Also, a smooth coating is formed at the finish, thanks to which you can not worry about the quality of gluing thick wallpapers or get a textured coating with paint and varnish products.

The model has an adequate consumption of up to 9 kg per square meter, the solution stretches well and quickly levels out, without forming bubbles, and after drying it does not crack.

For rooms with high humidity, it is better not to use this sample, even under tiles.

Yes, and it is better to entrust the application to a professional, since after 20 minutes it is almost impossible to work with a diluted mixture.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-50.
4. The consumption of the mixture according to the manufacturer is 8 - 9 kg per square meter. m. with a thickness of 10 mm.
5. Water consumption per 1 kg of the mixture - 580 ml.
6. The pot life of the solution is 20 minutes.

TOP-3 of the best gypsum plaster for interior work in small packaging 5-10 kg

Knauf Rotband, 10 kg

Universal plaster for interior finishing works, which is created on gypsum basis and with additives that provide increased adhesion.

Due to this, the base does not need to be primed, the solution will lay down tightly and be easily distributed over the surface. A layer thickness of 5 to 50 mm is allowed, with a layer of 10 mm per square meter it takes up to 8.5 kg.

The solution is diluted according to the recipe, 600 ml of water is consumed per kg of the mixture, after which the plaster must be completely used in 25 minutes, since it cannot be re-diluted with water.

Even with a thick layer, the plaster does not crack and gives a smooth surface at the finish, which is ideal for painting or wallpapering.

Due to its high water-holding capacity, it is suitable for laying in the bathroom or in the kitchen, it allows you to regulate the microclimate in the room, it is well breathable.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-50.
4. The consumption of the mixture according to the manufacturer is 8.5 kg per sq. m. with a layer of 10 mm.
5. Water consumption per 1 kg of the mixture - 600 ml.
6. The pot life of the solution is 25 minutes.

Unis Teplon, 5 kg

This gypsum plaster for interior decoration is considered one of the best representatives kind of, as it has a pure snow-white color.

Designed for finishing walls and ceilings in rooms with normal humidity, best for painting or wallpaper. Without the use of a plaster mesh, the mixture can be applied in a layer up to 5 cm thick.

It is also allowed to use this mixture in the bathroom or in the kitchen if tiles are laid on top.

The plaster has received high marks from experts due to its unique formulation that provides fast drying, as well as plasticity, moisture resistance and reduced costs for giving the walls a white tint.

The surface is formed smooth, but porous bases must be primed, since the adhesion indicators are insufficient, they can affect the further fixing of the mixture.

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-50 kg.
4. The consumption of the mixture according to the manufacturer is 4 - 4.5 kg per square meter. m. with a layer of 5 mm.
5. Water consumption per 1 kg of the mixture - 500 ml.
6. The pot life of the solution is 50 minutes.

Bergauf Bau Putz Gips, 5 kg

Gypsum plaster with high crack resistance. Easy to work, plastic stretches well and evenly distributed over the surface, without the appearance of bubbles and pits.

Not suitable for thick layer application, maximum allowable is 30 mm. There are three colors to choose from in the line: grey, white and beige.

Can be applied over concrete, brick, gypsum, aerated concrete, suitable for grouting. Dries quickly, color evenly.

To dilute the solution does not require a lot of water, 420 ml of water goes per kg of the mixture. The solution is suitable for work for about an hour, then it should be replaced (re-dilution negatively affects the density and durability).

Main characteristics:

1. The basis of the mixture is gypsum.
2. The surface texture is smooth.
3. Layer thickness, mm - 5-30.
4. The consumption of the mixture according to the manufacturer is 11 - 13 kg per square meter. m. with a layer of 10 mm.
5. Water consumption per 1 kg of the mixture - 420 ml.
6. The pot life of the solution is 60 minutes.

Which firm to choose?

Of the foreign manufacturers of gypsum plaster, we can safely recommend the companies KNAUF and Weber.

Of the domestic analogues, mixtures from the brands Volma, Prospectors and Rusean are especially popular.

Customer Reviews

Useful video

From the video you will learn how to choose plaster for interior work: